A lateral load resisting system of a 4-story building consists a K-truss and is shown in the figure below. Based on the ASCE 7-10, the wind load at each floor level was calculated and applied to the truss joints as shown in Figure below.
1. Determine if the truss system is determinate and Stable (support A is pin; and support B is roller)
2. Calculate the support reactions
3. Using any analysis method, calculate the forces in members FJ, HJ and HK of the following truss under applied loading. Indicate if the forces are tension or compression.
Problem 2: A lateral load resisting system of a4-story building consists a K-truss and is shown in the figure below. Based on the ASCE 7-10, the wind load at each floor level was calculated and applied to the truss joints as shown in Figure below. 1. Determine if the truss system is determinate and Stable (support A is pin; and support Bis roller 2. Calculate the support reactions 3. Using any analysis method, calculate the forces in members HJand HK of the following truss under applied loading. Indicate if the forces are tension or compression 9 ft 9 ft 25 k 12 ft 50 k 12 ft 50 k 12 ft 50
The post A lateral load resisting system of a 4-story appeared first on My Assignment Online.
