Limited Offer Get 25% off — use code BESTW25
No AI No Plagiarism On-Time Delivery Free Revisions
Claim Now
Prices start at $5 per page · plagiarism-free papers · free revisions for 14 days 24/7 support: support@bestwriters.com
Uncategorized

Definition of blind swimming

  • Posted
  • Authoradmin
  • Length3,203 words
  • Reading time14 min
Write My Assignment FREE

Title 

2. Abstract 

3. Introduction  

– Definition of blind swimming  

– Existing Technology 

– Current problem 

4. Objectives  

5. Methods  

– Interview 

– Design Approach 1+2 

    – settings  

    – equipment  

    – Product Budget  

    – expected results  

    – expected limitations  

– User interfaces 

    – Device to user 

    – User to device 

    – Processing unit 

    – Power supply 

– Implementation 

    – Prototype testing  

    – Lab test  

    – User test 

6. Working schedule  

7. Budget  

8. References 

9. Appendix 

– Interview sample questions 

– Information sheet for user test 

– Informed consent form for user test 

I need to cover the following part:

. Methods  

– Interview 

– Design Approach 1+2 

    – settings  

    – equipment  

    – Product Budget  6000 hkd in total

    – expected results  

    – expected limitations  

Should be 800 words in total.

The content is about blind swimmer assistive device.

You can use the information from my group’s literature review part below.

Literature Review on Machine Vision

Introduction

The purpose of this project is to describe and evaluate the main problems of blind swimmers, and propose possible solutions to help the swimmers to overcome mobility hindrances using smart technologies.

– to describe and evaluate the main problems of blind swimmers
–  to propose possible solutions to help the swimmers to overcome mobility hindrances using smart technologies

In our project, we are going to use a camera to monitor the line at the bottom of the pool. The line at the bottom of the pool acts as a reference line to tell whether the swimmer has deviated from the lane. In this occasion, machine vision is used. According to the Automated Imaging Association (AIA), machine vision encompasses all industrial and non-industrial applications in which a combination of hardware and software provide operational guidance to devices in the execution of their functions based on the capture and processing of images (Vision Online, 2020). In our project specifically, straight line detection algorithm should be used. In this review, the basic principles of machine vision, specifically line detection, will be reviewed, as well as the criteria needed to be considered while implementing machine vision.

Brief summary of the basic mechanics of machine vision

What machine vision does it that through a camera, it converts analog signal to a digital signal. Then it processes the digital signal according to the computer software. Take the diagram presented in Davies’s book as an example (Davies, 2012)

From the images in (a) of 25 bits each, with addition with a associated class to indicate its interpretation, the computer learns to identify input data and associate it to the alphabets by a “training set”. When being presented a new 25-bit information such as (b)(1), the computer recognises it as a “U” if the training sets are done properly.

Current focuses on machine vision

Machine visions can be used to classify and recognise a wide range of things. Including line, object, pattern, depth etc. In traditional machine vision technologies, handcrafted features are used to identify images. Computer scientist focuses on discovering, understanding, characterizing, and improving features that can be extracted from images (Nanni et al., 2017). The Scale Invariant Feature Transform (SIFT) is often a reliable tool to identify object rotation and scale variations(Lowe, 2004). Computation of handcrafted feature requires two steps. It first locates the characteristic regions of the presented image by a keypoint detector, then a descriptor will be calculated to characterise the keypoint(Awad and Hassaballah, 2016).

Yet, newer technologies have been emerging within recent years. For the most sophisticated image classification tasks, non-handcrafted features are used. Deep learning tackles the task by means of convolutional neural networks (CNNs). Multiple layers of complex networks act as feature extractors(Schmidhuber, 2015). The features are learnt by the network from observation of training datasets.

Straight line detection

However, in our project, deep learning is not expected to be used. First, developing a CNN is extremely tech-demanding, which is unlikely to be learned and developed by our team within the time given. And second, line recognition can be easily achieved by handcrafted features.

The Hough transform(HT) technique is often used for line detections (Leavers, 1992). First, the algorithm defines all P point which sets of lines passes through it. Then, by listing all sets of collinear points Pi, a single line will be found that are common to all sets.

Alternatively, random sample consensus (RANSAC) is a highly effective method for detecting lines. According to Davies (Davies, 2012), RANSAC operates by making a sequence of hypotheses about the target objects, and determines the support for each of them by counting how many data points agree with them. The algorithm below (Davies, 2012) show that in order to form a straight line hypothesis, the algorithm has to only take any pair of edge points from the list of N. N is obtained by applying local maximum operation. For each hypothesis we run through the list of N points finding how many points M support the hypothesis. Finally, Mmax. is produced after repeating the process through all the N points.

The difference between the HT and the RANSAC technique is that for RANSAC technique, information is more compactly stored. This is because for RANSAC, only the hypotheses are stored in current memory. On the other hand, in HT, the whole parameter space is stored in current memory.

Summary

Machine vision can involve very novel technologies, and computer scientists now are still exploring the field of machine vision in terms of deep learning. However, in our project, machine vision technology can be relatively accessible to us since only line detection is needed. Besides, there are already existing products in the market which includes a camera with built in algorithms for object/line detection(e.g. pixy2)(Chetvertkov et al., 2019). So, the main challenge for our project in terms of machine vision will be how to use the line generated by the algorithm to determine whether the swimmer has deviation the lane or not.

In our project, almost all equipment including camera, fitness tracker and earbuds will be in direct contact with water, therefore it is highly important to protect the devices and make them waterproof. First of all, it is important to note that waterproofness of any device could be doubted, because according to the Ingress Protection rating scale the use of term “waterproof” communicates the idea that this is a permanent condition, and device is fully protected from water damage (HZO). To make blind swimmer assistive technology work under water without lagging and sensor being confused by water we selected certain characteristics that device should match with, like being completely safe under water, earbuds should ensure the sounds and guiding commands don’t sound like they are being played from inside a dishwasher, in addition, our wireless technology should work in the big blue. Since no assistive technology for blind swimmers that meets all necessary requirements has been created yet, we tried to find best and most importantly affordable matches in the market and discuss their properties.

According to the information introduced on bestwirelessbluetoothheadphones.com there is only one pair of waterproof earbuds among all IPX rated headphones that satisfies all above listed requirements – Swimbuds Sport Waterproof headphones. Swimbuds Sport Waterproof headphones by Underwater Audio company have waterproof certification of IPX8 which means they can be submersed in up to 3 meters of water, it also means that the equipment is hermetically sealed. They have great sound quality under water, and they stay in place even during rigorous swimming (Jim & Frank, 2020).

Figure 1. Swimbuds Sport Waterproof headphones in use

Figure 2. Pixi 2 For the camera we will use Pixi 2 Camera sensor, which uses the principle of color recognition, in other words it detects only the images that we need sending the corresponding data via 6 main channels: UART, SPI, I2C, USB and digital or analog (Generation Robots). Pixi 2 Camera compatible with Arduino and Rasberry Pi and has Arduino cable, USB cable and mounting brackets, however, it cannot be used under water, so it requires waterproof case, and all cables should be replaced by waterproof ones. To protect the camera, we can use waterproof case for portable device such as one invented by Takashi Shimamura in 2002. A waterproof case was specially designed for containing a portable device such as a digital camera, a video camera, a personal digital assistance (PDA), in our case it is Pixi 2. Waterproof case comprises a case body, a case operation part, a moving and holding device mounted to the case body and wherein the moving and holding device (5). Figures 1A and 1B below illustrate a schematic cross-sectional view of a waterproof case when a portable device is inserted inside it.

Figure 3. Waterproof case’s cross-sectional view

When portable device like camera is inserted into the case body, case holds the portable device in a moved position, the operation part projected in a direction perpendicular to an inserting direction of the portable device. Wherein the fixing device inside the waterproof case is configured to receive a tripod for a camera (Shimamura, T., 2006). By using a tripod image blurring caused by a camera shake can be obviated. Tripod is engageable with the screw-tapped hole in the fixing member 56 of the waterproof case.

Figure 4.. Fixing member 56 for an engageable tripod

High waterproofness of a case can be achieved by shortening the peripheral length of the O-ring 8 (Figure 3). Moreover, the size of the cover 2 (Figure 3) is relatively small, therefore it helps to protect the case from possible deformations due to water pressure and water leakage (Shimamura, T., 2006).

Literature Review on Haptic Feedback

Introduction

In our project, we need to notify the users when they approach the edge of the swimming pools with the help of haptic feedback. Haptic feedback refers to the technologies that communicate with users by simulating the sensation of touch (Sreelakshmi & Subash, 2017). It can be categorized into different types of feedback, for instance, force, vibrotactile, electro-tactile, ultrasound feedback etc. The wide range of feedbacks allow haptic technology to have widespread application. To provide timely notification to the user, a wearable vibrational haptic device will be employed in our project. The literature review will therefore focus on the current development of vibrational haptics.

Main Types of Vibrational Haptics

Eccentric Rotating Mass vibration motor (ERM)

The ERM, also known as pager motor, is a DC motor with an unbalanced mass attached to the motor shaft. As the shaft rotates, the spinning of the asymmetric mass creates an uneven centripetal force, and thus a net centrifugal force. This causes displacement in the motor. With the high-speed revolution, the continuous displacement is perceived as vibration. The intensity of vibration produced by ERMs can be adjusted by the current supplied to it. ERM is one of the mostly used haptic sensors because it has lower cost and it is a very suitable choice when the driving circuit is simple (Critchley, 2018). Meanwhile, the start time of ERM is relatively long as it requires 20-50ms to reach the desired intensity of vibration (Bala, 2016).

Fig. 1. Exposed diagram of a ERM from Precision Microdrives

Linear Resonant Actuator (LRA)

LRA is an AC motor that creates oscillating force across single axis. The AC voltage drives a voice coil pressing against a moving mass which is connected to a spring. When the voice coil resonates with the same frequency as the spring, the actuator starts to vibrate with a perceptible frequency. The intensity of LRAs can be easily controlled by AC input. The advantage of LRA is that it has short start time, which is approximately 10ms, and it is much shorter than that of ERMs (Bala, 2016).

Fig. 2. Exposed diagram of LRA

Piezoelectric Actuators

Piezoelectric actuator works on the principle of piezo effect, which is the phenomenon that electric charge is generated when a material is under mechanical stress. The piezoelectric actuators utilize the inverse piezo effect and thus convert the electric energy into mechanical energy. When voltage is applied to the piezoelectric material, it slightly elongates, and the change in dimension is used to generate vibration. The benefits of using piezoelectric actuator are that it is very precise, and the response time is very short (Mihai, 2012).

Fig. 3. Working principle of a piezoelectric actuator

Current Applications of Haptic Feedback

The application of haptic feedback nowadays is highly extensive. The common applications are the touchscreen of smartphone and game console controllers. For the mobile device, surface haptics produce variable forces on our fingertips as we interact with the touchscreen to provide better using experience. The programmed vibrations in handlebars of the video games also provide immersive experience to the users. Take the automobile steering wheel controllers as an example, the vibration of the controllers can give the player the realistic feeling that they are driving on the road. The use of haptic technology in virtual reality is also brought into spotlight in recent years. Haptic suits that allow users to feel explosion and bullet impacts are also developed to provide an immersive virtual reality experience.

Conclusion

With the proliferation of cellphones, video gaming and other novel technologies, haptic feedback will continue to be the crucial part to bridge the human-device experience. Haptic devices with different kind of interfaces will also be developed, it will definitely provide a more lifelike experience to users with the virtual environment.

For the three types of vibrational haptics, namely ERM, LRA and piezoelectric actuator, all of them are very accessible to us in the market. They are all manufactured into different forms and shapes to provide wide range and flexible applications to consumers. Considering the cost, ERM might be the best choice for our setup, the further practical comparison will be carried out to select the most suitable haptic.

Literature Review of the Need of Swimmers with Visual Disability

Introduction

The target of our project is swimmers with Visual Disability, in order to determine our objective, it is vital for us to investigate the difficulties swimmers face while swimming. In the following part, the difficulties and current solutions will be discussed.

Difficulties while Swimming experienced by Swimmers with Visual Disability

While swimming, it is impossible for the swimmers with visual disability to observe the environment thoroughly through limited sensation. Referring to DeLisa (2012), the maintenance of stable orientation and swimming in a straight line within the boundaries of the lane are difficult for blind swimmers. According to USA Swimming (n.d.), other than difficulties in learning through verbal instructions and knowing the positions of the start and end of the pools while swimming, blind swimmers may not be able to utilize their vision to maintain suitable head and body positions while swimming. Blind swimmers may face difficulties while sharing the lane with other sighted swimmers. It is understandable that it is difficult to maintain stable distance with other swimmers in the same lane.

In terms of injuries, swimmers with visual disability are more vulnerable than common athletes. In a study conducted with 28 visually impaired swimmers from the Brazilian Paralympic Team, 18 of the athletes experienced a total of 41 sports injuries with the prevalence of 64% and 1.5 injuries per athlete from 2004 to 2008(Silva, 2013). According to Silva (2013), injury is defined as ‘any injury that caused an athlete to stop, limit, or modify participation for 1 or more days’ and prevalence is calculated as the quotient of the division of the number of athletes injured by the investigated athletes. With reference to Richardson (1999), 42% of injuries of competitive swimmers happens in water, including injuries to the heel when accidental hit of the heel occurs while flipping around the pool end.

Current solutions

1. Tapper

In the Paralympics, tappers are used to indicate the timing that the swimmers need to flip around the edge of the pool. According to the International Paralympic Committee (2017), ‘A tapper is a person who lets the swimmer know when they are approaching the end of the pool by “tapping” them either once or twice.’ However, there exists the limitation of this method. Training is needed for people to become professional tappers and trust and confidence need to be built between the swimmers and the tappers (2001).

2. CASBlip

According to Elmannai (2017), CASBlip is a wearable aid system for blind people which facilitate object detection, orientation and navigation of users with visual disability. The system makes use of the sensor module of a pair of glasses including a 1*64 3D CMOS image sensors and laser light beams for object detection as shown below.

Also, Field Programmable Gate Array (FPGA) is used to manipulate the collision of laser light beams with the enclosure object to reflect to the lenses of the camera. Calculation of the distance and information is run by the application software. The use of FPGA also contributes to the acoustic module by processing information of the surrounding in order to locate the obstacles. The information is then converted to audial signals received by stereophonic headphones. However, the image of acquired is not accurate due to external noise. Stereovision and addition of sensors are recommended to improve the accuracy.

3. Samsung’s Blind Cap

Blind Cap is developed by Samsung company that help blind Paralympic swimmer to notice the edge of the pool. This facilitates them to know the timing to flip to turn for another lap. A gentle vibration is sent when the end of the pool is detected. he limitation of this cap is that the wearing of Gear S2 smartwatch or usage of Android phone by a coach is required as the device is controlled by an app called Bland Cap which is connected to the Blind Cap via Bluetooth. Therefore, it is impossible for the swimming to use the cap independently.

4. Swimmer Cueing Interface device

A group of students from Engineering Physics Project Laboratory of the University of British Columbia developed a device that send haptic and audio signals to guide swimmer to their suitable position and direction to keep swimming in a straight line in a lane (Zverev, 2011). Wireless communication is used with an operator sending information to the cuing device through the host laptop. However, dry and west tests of the device are not performed due to the time constraints of their projects. Therefore, the device is not able to be put into use.

Conclusion

From the above research, our objective can be narrowed down to guiding blind swimmers to know how to swim in a straight line within the lane and flip to turn around the edge of the pool. It is more preferable to develop a device that can be used by the swimmers independently and image capture technology should be considered.

The post Definition of blind swimming appeared first on My Assignment Online.

Plagiarism Free Assignment Help

Expert Help With This Assignment — On Your Terms

✓ Native UK, USA & Australia writers ✓ Deadline from 3 hours ✓ 100% Plagiarism-Free — Turnitin included ✓ Unlimited free revisions ✓ Free to submit — compare quotes

admin

Academic writer and editor at BestWriters.

Get your paper off your plate tonight

Post your instructions for free. Prices start at $5 per page.

Place an order