This Assignment assesses the following module Learning Outcomes:
LO1: Explore the underlying physical principles and numerical methods of CAD and FEA techniques
LO2: Examine the analysis and modeling processes for a complex design using complex physics
Assignment Brief:
The worked solutions must be very clear and easy to read. You can either produce your calculations using your own handwriting and then scan and upload it, or use word processing.
Analysis of a two-dimensional structure
The structure in Figure 1 consists of three bar elements.
Each bar element is indicated in Figure 1 with a number enclosed in a circle, whereas the numbers without the circle around it represent the nodes.
A force of F kN (kilonewtons) is applied as showed in Figure 1 at node 3. The cross-sectional area of the three bar elements is A 〖mm〗^2 (squared millimiters). The three elements are made of Aluminum with Young’s Modulus of E GPa (gigapascal). Bar element 1 has a length of L m (meters), bar element 2 has a length of L/2 m (meters) and bar element 3 has a length of L/3 m (meters).
Figure 1: structure consisting of three bar elements
P (load, kN) – 10
A (cross-sectional area, mm^2) – 200
E (Youngs Modulus, GPa) – 70
L (length of bar element 1, m) – 3
L/2 (length of bar element 2, m) – 1.5
L/3 (length of bar element 3, m) – 1
Task1: Determine the stiffness matrix of each bar element. (10 marks)
Task 2: Determine the overall stiffness matrix of the structure in Figure 1 . (20 marks)
Task 3: Determine the force-deformation relationship for the overall structure in Figure 1. (10 marks)
Task 4: Calculate the nodal displacements of the interfaces between the materials. (30 marks)
Task 5: Calculate the nodal forces in each bar element (20 marks)
Task 6: Calculate the stress on each element (20marks)
Marking Scheme
Task1 is worth 10% of the marks of this assignment.
Task 2 is worth 20% of the marks of this assignment.
Task 3 is worth 10% of the marks of this assignment.
Task 4 is worth 30% of the marks of this assignment.
Task 5 is worth 20% of the marks of this assignment.
Task 6 is worth 10% of the marks of this assignment.
The post Explore the underlying physical principles and numerical methods of CAD and FEA techniques appeared first on EssayBishop.