Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 1 of 8
Instructions to Student
| |
Answer all questions. Deadline of submission: 02/06/2020 |
23:59 |
| | The marks received on the assignment will be scaled down to the actual weightage of the | |
| assignment which is 50% marks | ||
| | Formative feedback on the complete assignment draft will be provided if the draft is submitted at least 10 days before the final submission date. Feedback after final evaluation will be provided by 16/06/2020 |
|
| |
Module Learning Outcomes
The following LOs are achieved by the student by completing the assignment successfully
1) Demonstrate an understanding of the difference between data, information and knowledge
2) Compare and contrast strategies for the capture, organisation, dissemination and application of
knowledge within an organisation
Assignment Objective
To develop the appreciation that we are currently living in the information-knowledge era, where
producing and sustaining knowledge is now fast becoming the business strategy for organizations. Also to
appreciate the significance of intellectual capital is rising and knowledge workers are becoming the key
drivers in organization. Moreover, to realize the potential of knowledge retention and creation and the
need to strive to become a valuable asset and contribute effectively towards the growth and development
of their workplace.
Assignment Tasks
Task 1: Submit a work proposal for this assignment or before 02/05/2020 (23:59) which must include:
| |
Understanding of deliverables – a detail description of deliverables Timeline for completion of the given tasks. Identification of resources to be used |
| The work proposal must be submitted in a word file through the link available in Moodle. | (10 Marks) |
| ` | |
| IN SEMESTER (INDIVIDUAL) ASSIGNMENT | |
| Module Code: COMP 0364.1 | Module Name: Knowledge Management |
| Level: 3 | Max. Marks: 100 |
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 2 of 8
Task 2: You are planning to start a small business (business of your choice) and you would like to
make knowledge management a key part of your practice. Critically discuss the strategies you
will use to manage your business knowledge. Your critical discussion should include the following.
a) The kind of data, information, and knowledge you will focus on capturing. (10 marks)
b) Based on the nature of your business, the kind of knowledge capturing techniques you will
have in place and the possible methods that you will use to elicit knowledge from the
knowledge worker. (20 marks)
c) The kind of tools, technologies and methods you will use to store the captured knowledge.
Points discussed in part a) and b) should be taken into consideration. (10 marks)
d) How will you apply/use the captured knowledge? Outcome measurement and solution
adoption should be taken into consideration. (10 marks)
e) How will you share/disseminate valuable knowledge? Knowledge accessibility and diffusion
should be taken into consideration. (15 marks)
f) Your plan for ensuring knowledge creation. Incentives and mechanisms can be considered.
(15 marks)
Task 3: Prepare a well-structured, formatted and presented report of your critical discussions of
the above as per the rules & regulations and the guidelines provided below. (10 marks)
Rules & Regulations:
All resources should be cited using CU Harvard style.
The final assignment must have a Title page, Table of Contents, References/ bibliography using CU
Harvard Style and page numbers.
| | Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of the faculty. |
| Softcopy in word format is to be submitted through Turnitin link on Moodle. | |
| | Viva may be conducted after the assignment submission as per the dates informed earlier. |
Guidelines:
Assignment must be computer typed.
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 3 of 8
| |
Font – Times New Roman Font – Style – Regular Font – Size – 12 Heading should be with Font Size 14, Bold, Capital and Underline. |
| |
Explain with suitable examples wherever required. Each student has to do the assignment individually You can refer books in eLibrary or use internet resource. But you should not cut and paste material from internet nor provide photocopied material from books. The assignment answers should be in your own words after understanding the matter from the above resources. |
Important Policies to be followed
1. Student Academic Integrity Policy*:
MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation
of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of
violation of academic integrity shall be cancelled.
All cases of violation of academic integrity on the part of the student shall fall under any of the below
mentioned categories:
1. Plagiarism
2. Malpractice
3. Ghost Writing
4. Collusion
5. Other cases
If the student fails a module and has a proven case of academic integrity violation in this module, the
student is required to re-register the module. This is applicable to first and second offenders of
plagiarism.
1. Plagiarism
A. First offence of plagiarism
I. If a student is caught first time in an act of plagiarism during his/her course of study in
any assignment other than project work, the student will be allowed to re-submit the
assignment once, within a maximum period of one week. However, a penalty of
deduction of 25% of the marks obtained for the resubmitted work will be imposed.
| II. | Period of re-submission: The student will have to re-submit the work one week from the date he or she is advised to re-submit. |
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 4 of 8
III. If the re-submitted work is also found to be plagiarized, then that assessment will be
awarded a zero mark. Re-submission of the work beyond the maximum period of one
week will not be accepted and the assessment will be awarded a zero mark.
B. Second offence of plagiarism
If any student is caught second time in an act of plagiarism during his/her course of study (in a
subsequent semester), the student will directly be awarded zero for the work in which plagiarism
is detected. In such cases, the student will not be allowed to resubmit the work. A warning of
suspension shall be issued, and student has to sign an undertaking and undergo counselling
session in such cases.
2. Malpractice/Ghostwriting/Collusion
A. First offence of Malpractice/Ghostwriting/Collusion
If a student is caught in an act of Malpractice/Ghostwriting/Collusion for an assessment
component irrespective of coursework or end semester, the student shall fail the module
and shall be required to re-register the module
B. Second Offence of Malpractice/Ghostwriting/Collusion
If a student is caught a second time in an act of Malpractice/Ghostwriting/Collusion for
an assessment component irrespective of coursework or end semester, the student
shall fail the module. A warning of suspension shall be issued, and student has to sign
an undertaking and undergo counselling session in such cases.
3. Third Offence of Academic Integrity Violation
If a student is caught a third time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student
shall fail the module and also shall be suspended for one semester from the College, as
recommended by institutional level academic committee, Chaired by the Associate Dean, Academic
Affairs.
4. Fourth Offence of Academic Integrity Violation:
If a student is caught a fourth time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student shall
fail the module and also shall be expelled from the College, as recommended by institutional level
academic committee, Chaired by the Associate Dean, Academic Affairs.
5. Other cases
If a student commits an act of academic integrity violation as per the definition of “other cases”
mentioned in the previous section or of a different nature, student’s case shall be forwarded to an
institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. The
committee shall investigate the case by means of a viva and/or a disciplinary hearing and shall take
appropriate decision. The penalty that can be granted to a proven case of academic integrity violation
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 5 of 8
which falls in this category of “other cases” can be a warning/component zero/ module
fail/suspension/expulsion depending on the nature and gravity of the offence.
6. Types/Variations of Cases:
| I. | If plagiarism is detected in any component of one assessment, the deduction in marks will be applicable for the whole assessment, even if only the component or part submission alone needs to be resubmitted. If plagiarism is detected in a group assessment, all students of the group will be considered as having committed an act of plagiarism and the policy will then be applied to all students If plagiarism is detected in any component of a group assessment, the deduction in marks will be |
| II. | |
| III. |
applicable for the whole assessment even if only the component or part submission alone needs
to be resubmitted.
All students of the group would be considered as having committed an act of plagiarism and the
policy will then be applied to all the students of the group.
| IV. | If the assessment consists of components or part submissions that could be a group assessment component (e.g. group assignment) and an individual assessment component (e.g. individual reflection), the following will be applicable: |
| a. | If plagiarism is detected in the group assessment component, all students of the group |
will be considered as having committed an act of plagiarism, The policy will then be
applied to all students of the group. Group assessment component will be resubmitted
as per the policy.
b. If plagiarism is detected in the individual assessment component, the individual
assessment component will be resubmitted and the policy will then be applied to that
student alone.
c. For both (a) and/or (b), the deduction in marks will be applicable for the whole
assessment.
* for further details Refer to MEC Student Academic Integrity Policy in Student Handbook.
2. Late Submission Regulations:
It is the students’ responsibility to check all relevant timelines related to assessments.
As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days)
for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the
submitted work shall be imposed for each working day following the last date of submission
till the date of actual submission. Assessment documents submitted beyond a period of one
week (5 working days) after the last date of submission will not be accepted and will be awarded
a zero for that assessment. In cases where the submission has been delayed due to extenuating
circumstances, the student may be permitted to submit the work without imposing the late
submission policy stated above. The extended period of submission will be one week from the
original last date of submission. In such cases, the student is expected to submit the supporting
certificates on or before the original last date of submission of the assessment and the decision
of extension rests with faculty responsible for the assessment .The late submission policy shall be
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 6 of 8
applied if the student fails to submit the work within one week of the original last date of
submission.
Students may contact their teachers for clarification on specific details of the submission time if
required.
3. Research Ethics and Biosafety Policy
To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved
including the welfare of animals and the integrity of environment, all student projects are
expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the
following shall apply.
| | Research and other enterprise activities shall be conducted by maintaining the high ethical standards consistent with national and international standards and conventions. |
| | Any research at MEC that is categorized as high-risk research shall be subject to review and approval by the Research Ethics and Biosafety Committee. |
Research activities involving collection of human or animal tissues and manipulation of microbial,
animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety
Committee.
Participants involved in research must be informed about the purpose of research and intended
uses of research findings. Written consent must be obtained from people involved prior to the
commencement of research.
| | Data obtained from participants must be treated with high confidence and should be used only for the intended purpose of research. |
Assessment Evaluation Criteria
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 7 of 8
Module Name: Knowledge Management (COMP 0364.1)
Evaluation Grid Sheet – Assignment + Viva (Max Marks = 100)
Student ID: Student Name:
| Deliverables | Marks | |||
| Task 1 | 0-3 | 4 – 6 | 7-10 | Mark |
| Work Proposal | Incomplete | Has a basic understanding to answers to questions with referenced answers |
Good document with all aspects considered and answered in own words with complete understanding and references |
|
| Task 2 | 0-3 | 4-6 | 7-10 | Mark |
| Data, information, and knowledge |
Limited critical discussions are presented with regards to the kind of data, information, and knowledge that needs to be focused on. |
Satisfactory level of critical discussions are presented with regards to the kind of data, information, and knowledge that needs to be focused on. |
The kind of data, information, and knowledge that needs to be focused on are clearly identified and justified |
|
| 0-7 | 8-14 | 15-20 | Mark | |
| Knowledge capturing techniques and eliciting methods |
Limited critical discussions are presented with regards to the knowledge capturing techniques and eliciting methods to be used |
Satisfactory level of critical discussions are presented with regards to the knowledge capturing techniques and eliciting methods to be used |
The knowledge capturing techniques and eliciting methods to be used are clearly identified and justified |
|
| 0-3 | 4-6 | 7-10 | Mark | |
| The kind of tools, technologies and methods to be used for knowledge storing |
Limited critical discussions are presented with regards to the kind of tools, technologies and methods to be used for knowledge storing |
Satisfactory level of critical discussions are presented with regards to the kind of tools, technologies and methods to be used for knowledge storing |
The kind of tools, technologies and methods to be used to store the captured knowledge are clearly identified and justified |
|
| 0-3 | 4-6 | 7-10 | Mark | |
| Application and use of captured knowledge |
Limited critical discussions are presented with regards to the way captured knowledge will be applied and use. No mention of outcome measurement and solution adoption |
Satisfactory level of critical discussions are presented with regards to the way captured knowledge will be applied and use. Some mention of outcome measurement and solution adoption |
Critical discussions are well presented with regards to the way captured knowledge will be applied and use. Good mention of outcome measurement and solution adoption |
|
| 0-4 | 5-9 | 10-15 | Mark | |
| Sharing or disseminating valuable knowledge |
Limited critical discussions are presented with regards to sharing or disseminating of valuable knowledge. No mention of accessibility and diffusion of knowledge. |
Satisfactory level of critical discussions are presented with regards to sharing or disseminating of valuable knowledge. Some mention of accessibility and diffusion of knowledge. |
Critical discussions are well presented with regards to sharing or disseminating of valuable knowledge. Good mention of accessibility and diffusion of knowledge. |
Knowledge Management (COMP0364.1) – SPRG – 20 – CW1 (Assignment) – A – QP
MEC_AMO_TEM_034_01 Page 8 of 8
| 0-4 | 5-9 | 10-15 | Mark | |
| Plan for ensuring knowledge creation |
Limited critical discussions are presented with regards to plan for ensuring knowledge creation. No mention of incentives and mechanisms |
Satisfactory level of critical discussions are presented with regards to plan for ensuring knowledge creation. Some mention of incentives and mechanisms |
Critical discussions are well presented with regards to plan for ensuring knowledge creation. Good mention of incentives and mechanisms |
|
| Task 3 | 0-3 | 4 -6 | 7-10 | Mark |
| Report structure and format |
Poor formatting, referencing and presentation of the report |
Good attempt at formatting, referencing and presenting the report |
Good formatting, referencing and presenting the report |
| Total Marks |
| Penalty |
| Final Marks |
Remarks:
The post Knowledge Management (COMP0364.1) appeared first on My Assignment Online.