Prepared by: Dr Nazmus Shaker Nafi Moderated by: Dr Sanjeeb Shrestha May, 2020
| Assessment Details and Submission Guidelines | |
| Trimester | T1 2020 |
| Unit Code | MN603 |
| Unit Title | Wireless Networks and Security |
| Assessment Type |
Group Assignment (Max 5 members per group) |
| Assessment Title |
Implementation of Wireless networks and performance evaluation |
| Purpose of the assessment (with ULO Mapping) |
The purpose of the assignment is to implement wireless networks in Simulation environment and analyse the routing protocols, evaluate them in terms of security, QoS, and energy efficiency. Students will be able to complete the following ULOs: a. Analyse and compare wireless communication protocols; b. Test and evaluate various wireless networks performance; d. Apply and evaluate wireless network security techniques with consideration of ethical implications; e. Design and implement secure enterprise wireless networks |
| Weight | 30% |
| Total Marks | 100 |
| Word limit | 2500-3000 |
| Due Date | Week 11, 7th June 2020 Time: 11:59pm |
| Submission Guidelines |
All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page. The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings. Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style. |
| Extension | If an extension of time to submit work is required, a Special Consideration Application must be submitted directly on AMS. You must submit this application three working days prior to the due date of the assignment. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/specialconsiderationdeferment |
| Academic Misconduct |
Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description. |
MN603 Wireless Networks and Security Page#2 of 4
Prepared by: Dr Nazmus Shaker Nafi Moderated by: Dr Sanjeeb Shrestha May, 2020
Assignment Description
Task 1
Wireless networks performance varies from wired networks, the latter uses a guided medium and
wireless networks use unguided medium for transmission. To design and simulate wireless networks
the network simulator – 2 (NS – 2), an open source discreet event simulator could be used. The NS-2
simulator is a widely used simulation tool, which could generate trace files for analysis and comes
with a network animator to visualize the network performance.
This assessment requires students to compare and evaluate the performance of wireless routing
protocol using the NS – 2. The assessment requires students to design a wireless network topology in
NS – 2 and evaluate the generated trace files for a wireless routing protocol. The students are required
to carry out a critical analysis of the results of the protocol by plotting graphs and discussing the
outcomes.
The students are required to:
Design a wireless network consisting of 25 nodes; the dimensions for the given topology are
1000×800. The agent type should be User Datagram Protocol (UDP) and the traffic Constant
Bit Rate (CBR). The simulation should run for 300 seconds. Random deployment of nodes is
required and the nodes are required to transmit packets over the network. The wireless node
configuration should include the NS – 2 energy model.
| | Run the simulation on routing protocol Destination Sequenced Distance Vector Routing (DSDV) and Ad hoc On DemandDistance Vector (AODV). Critically analyse the trace files in |
terms of packets sent, received and dropped. These parameters should be plotted on graphs
and discussed in detail.
| | Include screenshots of the NAM (Network Animator) displaying the nodes deployed during the simulation and add screen shots of the simulation. Conduct comparative analysis on the results for packets sent, received anddropped for the two protocols. Appendix I should include the tcl srcript used in each simulation. |
| | |
| |
Task 2
Smart home or home automation technology provides homeowners’ security, comfort, convenience
and energy efficiency by enabling them to control smart devices, via an app on their smartphone or
other networked device. This technology enables you doing things such as turn the lights on/off,
stream music to a speaker, lock/open the doors remotely, and much more.
This task aims to simulate a smart home using Internet of Things (IoT) technology in Cisco Packet
Tracer. Students will purely practice with the IoT component offered by the Cisco Packet Tracer to be
used in the home. Those IoT devices will be connected to the home WLAN that enables the users to
control the things through wireless technology. The users should also be able to control the things
when they are outside home (remote access). This means the WLAN should be connected to a global
network that enables the users to have control on devices when they are at work.
The students are required to complete the following steps:
| | Explore the ethical implications in the design and implementation of Wireless Local Area Networks (WLANs). |
MN603 Wireless Networks and Security Page#3 of 4
Prepared by: Dr Nazmus Shaker Nafi Moderated by: Dr Sanjeeb Shrestha May, 2020
Test and prove a successful connectivity between users and IoT devices when they are at
home and when they are outside of home. You need to take a snapshot for each step of
testing followed by the explanation.
Marking Guide
| Section to be included in the report |
Description of the section | Marks |
| Introduction | Outline of the report | 5 |
| Report Layout | Report layout, style and language |
5 |
| NS – 2 Simulation and network design |
Simulation screen shots for routing protocol at 100s, 200s and 300s simulation time with description of the ongoing events for both DSDV and AODV |
20 |
| NS – 2 Trace file analysis | Provide a critical analysis of the two trace files in terms of packets sent, received, dropped |
10 |
| NS – 2 Simulation Results Analysis |
Plot and conduct comparative analysis on the graphs for packets sent, received, dropped for the two protocols. |
20 |
| Explore ethical implications |
Investigate and report the ethical implications in the design and implementation of a secure wireless LAN |
10 |
| Design, analysis, and implementation of smart home |
Design, Analysis, and implementation of a smart home using WLAN |
10 |
| Testing | Test and prove a successful of connectivity between users and IoT devices when they are at home and when they are at work. You need to take a snapshot for each step of testing followed by the explanation. |
10 |
| Conclusion | Write summary of the report highlighting the positive and negative points |
5 |
MN603 Wireless Networks and Security Page#4 of 4
Prepared by: Dr Nazmus Shaker Nafi Moderated by: Dr Sanjeeb Shrestha May, 2020
| Reference style | Follow IEEE reference style and format |
5 |
Marking Rubric for Assignment #1: Total Marks 100
| Grade Mark |
HD 80-100 |
DI 70-79 |
CR 60-69 |
P 50-59 |
Fail <50 |
| Excellent | Very Good | Good | Satisfactory | Unsatisfactory | |
| Introduction/5 | All topics are pertinent and covered in depth. Ability to think critically and source material is demonstrated |
Topics are relevant and soundly analysed. |
Generally relevant and analysed. |
Some relevance and briefly presented. |
This is not relevant to the assignment topic. |
| Report Layout /5 |
Exceptional report layout, style and language used |
Very good report layout, style and language used |
Good report layout, style and language used |
Acceptable report layout, style and language used |
Poor report layout, style and language used |
| Design of Networks in NS – 2 /20 |
Demonstrated excellent ability to think critically and present an exceptional design considering all the requirements |
Demonstrat ed good ability to think critically and present an exceptional design considering all the requirement s |
Demonstrate d good ability to think critically and present a good design considering all the requirements. |
Demonstrated ability to think critically and present a design |
Did not demonstrate ability to think critically and present a design. |
| NS – 2 Trace file analysis /10 |
Excellent understanding and explanation on trace file parameters |
Very good understandi ng and explanation on trace file parameters |
Good understanding and explanation on trace file parameters |
Demonstrated understanding and explanation on trace file parameters |
Poor understanding and explanation on trace file parameters |
| NS – 2 Simulation Results Analysis /20 |
Exceptional Result Discussion and comparative analysis |
Very good Result Discussion and comparative analysis |
Good Result Discussion and comparative analysis |
Fair Result Discussion and comparative analysis |
Unable to discuss Results and do comparative analysis |
| Explore ethical implications /10 |
Finding is clearly linked and well justified |
Finding is clearly linked and justified |
Finding is linked and convincing |
Finding is not linked and unjustified |
Finding is not available |
| Design, analysis, and implementation |
Demonstrated excellent ability to think critically and present an |
Demonstrat ed good ability to |
Demonstrate d good ability to think critically and present a |
Demonstrated ability to think critically and present a design |
Did not demonstrate ability to think critically and |
MN603 Wireless Networks and Security Page#5 of 4
Prepared by: Dr Nazmus Shaker Nafi Moderated by: Dr Sanjeeb Shrestha May, 2020
| of smart home and enterprise WLANs /10 |
exceptional design considering all the requirements |
think critically and present an exceptional design considering all the requirement s |
good design considering all the requirements. |
present a design. |
|
| Testing Smart Home network /10 |
Testing was successful between client and Access Point (AP). All required snapshots attached |
Testing was successful between client and AP. Some snapshots attached |
Testing was successful between client and AP. Few required snapshots attached |
Testing was partially successful between client and AP. All required snapshots attached |
Testing was not successful. |
| Conclusion /5 |
Logic is clear and easy to follow with strong arguments |
Consistency logical and convincing |
Mostly consistent logical and convincing |
Adequate cohesion and conviction |
Argument is confused and disjointed |
| Reference style /5 |
Clear styles with excellent source of references. |
Clear referencing style |
Generally good referencing style |
Sometimes clear referencing style |
Lacks consistency with many errors |
The post MN603 Wireless Networks and Security appeared first on My Assignment Online.