Prepared by:Dr Sanjeeb Shrestha Moderated by: Dr Ammar Alazab March, 2020
| Assessment Details and Submission Guidelines | |
| Unit Code | MN621 |
| Unit Title | Advanced Network Design |
| Assessment Type | Assignment 1 T1 2020 Individual |
| Assessment Title | Network requirement analysis and plan |
| Purpose of the assessment (with ULO Mapping) |
This assignment is designed to assess students’ knowledge and skills related to the following learning outcomes: b. Investigate suitable network designs to match requirements; c. Create appropriate frameworks and standards for network implementation; |
| Weight | Assignment 1a – 5% Assignment 1b – 10% |
| Total Marks | 60 * (factor of) individual demonstration marks 20 |
| Word limit | 1200 |
| Due Date | Assignment 1a – Week 4, Sunday 5:00 PM, 12/4/2020 Assignment 1b – Week 8, Saturday 5:00 PM, 10/5/2020 |
| Submission Guidelines |
All work must be submitted on Moodle by the due date. The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2.54 cm margins on all four sides of your page with appropriate section headings. Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style. |
| Extension | If an extension of time to submit work is required, a Special Consideration Application must be submitted directly to AMS. You must submit this application three working days before the due date of the assignment. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/specialconsiderationdeferment |
| Academic Misconduct |
Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available athttp://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy Procedure.For further information, please refer to the Academic Integrity Section in your Unit Description. |
MN621 Advanced Network Design Trimester 1, 2020 P a g e | 2
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab
March, 2020
Marks for assignment 1 will be calculated as follows:
Individual assignment 1 marks = marks obtained for the individual submitted report * demonstration
marks/20
For example:
Student X gets
28/60 marks for individual submitted report
15/20 marks for individual demonstration in week 5, 6 and 7
Total marks for student X out of 60 = 28 * 15/20 = 28 * 0.75 = 21/60
Assignment Description
Students are required to analyse the attached case study on “Guest Satisfaction and Loyalty with
Great Wi-Fi for Luxury Hotel in Greece”, to complete the assignment. It is to note that this
assignment consists of two parts a) Assignment 1a and b) Assignment 1b.
Assignment 1a
1. Project Scope and report requirements
The project scope and requirement should have a detail explanation of the planning and designing of
(both wired and wreless) network. It is recommended that bullet points are included whenever
necessary.
The following is the scope for Assignment 1a.
| |
Include points that you have gathered from the case study on their existing network. Discuss in a tabular form how the information obtained will be useful in designing the network. Discuss the approach you will be taking (include bullet points whenever necessary) to redesign the network both with wired and wireless connectivity . |
| |
Assignment 1b
The following is the scope for Assignment 1b.
2. Response to assignment 1a
| | It is mandatory that students should demonstrate how they have incorporated the feedback given in assignment 1a. You may use a tabular form whenever necessary. |
3. Network design and justification
| | Draw a network design that you think will be useful in the future for the industry that you have visited. Network should include the following requirements as a minimum: |
o 5 routers
o 7 switches
o 15 PCs
o 4 VLANs.
| | Suitable IP addressing scheme in tabular form (assume as many hosts as necessary for each department). |
MN621 Advanced Network Design Trimester 1, 2020 P a g e | 3
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab
March, 2020
Indicate where do you use static routing, dynamic routing protocols (name the protocols,
RIP, EIGRP, OSPF, etc.), Access Control List (ACL) as per the network preferences. Justify your
choices.
4. Network configuration
Configure your network using Packet Tracer. Write a report on
| |
Packet Tracer Network diagram- Copy diagram from your simulator Switch configuration Router configuration |
| |
Host configuration Access point and server configuration guidelines. |
5. Timeline and Budget estimation
This section should include the followings:
| |
Hardware requirements with the specification with costs Human resources and logistics Tentative timeline specifications. |
6. Demonstration
| |
Individual demonstration of packet tracer in Week 7. Mandatory to demonstrate work-in-progress demonstration in weeks 5 and 6. |
Marking Criteria
The following tentative marking criteria will be followed for the assignment.
| Marks | Section to be included in the report |
Description of the section |
| 5+5+5+5 = 20 |
Assignment 1a Project Scope and requirements |
Briefly outline the report and discuss the following Assignment 1a requirements. Attach an evidence of an industry visit in Appendix A. Include points that you have gathered from an industry professional on their existing network. Discuss in a tabular form how the information obtained will be useful in designing the network. Discuss the approach you will be taking (include bullet points whenever necessay) to redesign the network. |
| Assignment 1b |
MN621 Advanced Network Design Trimester 1, 2020 P a g e | 4
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab
March, 2020
| 10 | Network design and justification |
Well-designed network diagram. Labelled with IP addresses. A clear description of the approach taken for the design (may use bullet points for this). |
| 10 | Network topology diagram and implementation |
Well-designed topology diagram with simulating software. Network devices and appropriate command for the configuration should be detailed for implementation purposes. It would be best to have Comments for the commands used for configuration. For example, the following commands are for the dynamic routing protocol used for the configuration, the following commands for VLANs, creating trunk links, static routes, etc. Connectivity testing ping snapshots. |
| 5 | Timeline and Budget estimation |
Hardware requirements with the specification with costs Name of the network device with manufacturer’s name, series, model and ports – Type of the cables – Name of the server, PC with specification such as operating system, RAM, hard disk, etc. The cost specification of the hardware should be included. Human resources cost need to be included on an hourly basis. Timeline for the completion of the should be detailed. |
| 3 | Summary | Well comprehended summary. |
| 2 | Reference style | IEEE reference style. |
| 50 | Total Marks |
MN621 Advanced Network Design Trimester 1, 2020 P a g e | 5
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab
March, 2020
Demonstration
| Marks | Demonstration | Description |
| 10 | Work progression check |
Work progression record and consultation will be on week 5 and 6 by the lab tutor. Allocated marks to be awarded accordingly. |
| 10 | Packet tracer demo | Demonstration of the network design in packet tracer on week 7. |
| 20 | Total Marks |
Marking Rubrics
The details about the rubric are as follows:
| Grades | HD 80% and above |
D 70 – 79% |
CR 60 – 69% |
P 50 – 59% |
Fail <50% |
| Project scope and requirements (20) |
Concise and specific to the project |
Topics relevant and soundly analysed |
Generally relevant and analysed |
Some relevance and briefly presented |
Not relevant to the assignment topic |
| Response to assignment 1a (10) |
Clear and Concise |
Mostly clear and concise |
Mostly clear and mostly concise |
Mostly clear but not concise |
Not clear and not concise |
| Network topology diagram and implementatio n (10) |
All elements are present and very well integrated |
Components present with good cohesion |
Components presented and mostly well integrated |
Most components present and an average integration |
Lacks components and not integrated well |
| Timeline and Budget estimation (5) |
Excellent description and justification and well budgeted |
Excellent description and justification and but poorly budgeted |
Good description and justification and well budgeted |
Good description and justification but no well budgeted |
Poor description and justification poorly budgeted |
| Summary (3) |
Excellent comprehensio n and precise |
Excellent comprehensio n and but fuzzy |
Average comprehensio n and but clear |
Average comprehensio n and but fuzzy |
Not well comprehende d and fuzzy |
| IEEE Reference style (2) |
Clear styles with an excellent source of references |
Clear referencing style |
Generally good referencing style |
Sometimes clear referencing style |
Lacks consistency with many errors |
MN621 Advanced Network Design Trimester 1, 2020 P a g e | 6
Prepared by: Dr Sanjeeb Shrestha & A/Prof Savitri Bevinakoppa Moderated by: Dr Ammar Alazab
March, 2020
| Demonstratio n (Work progression check (10) ) and (Packet tracer demo (10)) |
Logic is clear and easy to follow with strong arguments |
Consistent logic and convincing |
Mostly consistent logic and convincing |
Adequate cohesion and conviction |
The argument is confused and disjointed |
The post MN621 Advanced Network Design appeared first on My Assignment Online.