Performance data for a Climate Master Tranquility Ducted Vertical Stack TMW036 has been excerpted below. (The full submittal set is in the class resources directory, file name: Ic402-climatemaster-commercial-tranquility-water-to-water-tmw-

Performance data for a Climate Master Tranquility Ducted Vertical Stack TMW036 has been excerpted below. (The full submittal set is in the class resources directory, file name: Ic402-climatemaster-commercial-tranquility-water-to-water-tmw-series-water-source-heat-pump-submittal-set.pdf). The full submittal set also contains details of where the piping is connected as well as the inlet and outlet pipe size. The heat pump is set at grade level near the edge of the building, as shown in Figure 2. The dimensions shown in Figure 2 have values: x=15′, ze=5′, H=800′. The piping is 1% ” SDR-11 HDPE. The design flow rate is 6 GPM at a heat pump entering fluid temperature of 80°F. This is quite a deep borehole by American standards, but not unusual in northern Europe. 1. Make a table showing all the fittings, their equivalent lengths, and their head loss at the design flow rate. (Include the heat pump, but you don’t need to determine its equivalent length.) Determine the total head loss of the fittings. znri MennrIfiPM have to be made up from 1 ‘A” to 1″and 1″to ‘A”