Remember prior to signing any consultant-client agreement you must establish and agree with
the client the scope of services to be provided, the outline brief and preliminary budget, the time
and site constraints, the need for specialist consultants and who will engage them, the fees.
Core (standard) Pre-Design Services to be provided
Any other services provided would involve additional fees and you should negotiate these with your
Client and probably on an hourly rate.
• Review Client’s design brief (if any) and requirements
• Review project budget and program (or establish them)
• Select (and depending on need at this stage) recommend and engage subconsultants
• Inspect site and assess site conditions and constraints.
• Provide preliminary assessment of regulations and authority requirements.
• Arrange and conduct meetings as required
• Prepare design briefs for the subconsultants (if required)
• Analyse functional relationships and area requirements (or establish them, depending on the level
and nature of client advice provided)
• Start Site Planning (given provisos above).
All these aspects you would need before you get to:
• Schematic Design,
• Design Development,
Review Client’s design brief and requirements
The architect/design team is responsible for reviewing the client’s brief at not only the pre-design
stage but at all stages of the design process.
Depending on the project, this may be extremely detailed, or very speculative.
Review (or establish) project budget and program
The architect/design team is required to:
• establish an adequate budget with the client to cover all aspects of the project including
the cost of the building/landscape works, the consultant fees, authority and regulatory fees
etc.
• negotiate with the client a program for the works which adequately allows for the proper execution
of all the architectural/landscape services and the construction phase.
• remember the program must be negotiated to allow for adequate float.
Select (and depending on need at this stage) recommend and engage subconsultants
This forms part of the core services provided by architect/landscape architect at the predesign stage.
The architect/landscape architect is required to advise the client on:
• What consultant services are required for the successful completion of the project.
• Selection of the consultants (those needed at this stage, consideration of those needed in future
stages)
• Conditions of Engagement of the consultants
• Negotiating the Consultant fees
Inspect site and assess site conditions and constraints
The architect/landscape architect is obliged to gather as much information about the site as is required
for the proper carrying out of professional services.
The client is obliged to provide as much information to the client about the site as they are able.
You should request from the client such information regarding the site as follows:
• Names and addresses of occupiers if appropriate
• Obtain a clear Copy of Title (now readily available online).
• Establish the client’s ownership of the site
• Any other relevant documents such as covenants, drainage plans etc.
As part of the site inspection and assessment of site constraints, you must:
• Study the context of the site
• Identify existing planning constraints, restraints or consents required for redevelopment etc.
• Inform the client of any further surveying requirements such as title re-establishment, features and
levels surveys, information regarding existing and adjacent buildings, advise the client to obtain a
geotechnical report on soil conditions.
• Measure up existing buildings on site, measure up in detail if they are to be retained or recycled
• Gather information about existing buildings or features on the site.
• Take photographs of the site and keep them in the file
• Record information about views, trees to be retained, existing buildings, reusable materials,
neighbourhood character, existing site services, rocks, evidence of toxic waste or dumped
materials on site.
• Check previous uses
• Investigate existing services on site (and issues with change of use, if any?)
• Record information about the climate, prevailing winds, orientation and solar angles, average
temperatures and humidity and rainfall.
Preliminary assessment of regulations and authority requirements.
You must make the client aware of the requirements of the various regulatory bodies and their controls
over the building process.
You must explain to the Client the impact of these authorities on the brief and possibly the project
budget.
You most certainly must make your client aware of the fees charged by these bodies for the approval
function or connection processes etc.
Authority Control may be through:
• Enacted law or Statute Law – controlled by Parliamentary Acts such as regulations, by-laws and
ordinances.
• Unenacted Law – accepted and enforced customs.
The main controlling authorities over the building and design process are the Building Control
Authorities such as the Building Code of Australia and local state controls enacted by local councils;
and town planning regulations controlled by state planning authorities and the local council.
• Check regulations such as the Building Code of Australia.
• Check the connection requirements for services (telephone, water, gas, sewerage, cable)
• Check the State historic buildings register to ensure the building is not classified.
• Check local/state planning guidelines
• Check requirements of state road authorities (road widenings etc.) and local traffic authorities
• Check for flood zones
• Establish zoning restrictions and planning constraints including heritage overlays
• Traffic departments of local authorities
• Check for easements (water, access, etc.)
• Check for covenants and other restrictions
• Sites which are owned by the government, churches or religious institutions, banks etc may have
further restrictions or requirements placed upon them and all of these need to be thoroughly
assessed and allowed for in the design.
• Check for any environmental issues/overlays.
Establish whether fees are required by these authorities and how much the fees are likely to be.
Find out how one applies for permits or connection to services etc., find out if there are time restraints
on permits
E.g. note that planning permits are only usually valid for two years before building works must
commence (or there will need to be an application for renewal).
If you do receive information from authorities or any of the above bodies make sure you write down all
that was said, get the name of the person you spoke to and when and keep these records in the job
file.
If you feel that it is necessary confirm all the information back in writing (good luck in getting local
authorities to commit initial advice to writing)
Arrange and conduct meetings as required.
• Conduct regular meetings with the Client for the passing on and confirmation of information.
• Conduct meetings with consultants as required and record Minutes of the Meetings as mentioned
previously in lecture notes and keep records of all meetings in the job file.
Prepare design briefs for the subconsultants.
All the subconsultants involved in the project must be properly briefed as to the design requirements of
the client’s brief.
Any changes to the brief must be conveyed to the consultants as swiftly as possible. (See later
lectures on this subject).
Analyse functional relationships and area requirements
• These items form part of the preparation of the brief or feasibility study if flow diagrams are
required to enable options to be explored, a particular floor plan to be developed and room or
function relationship to be resolved.
• You may establish as part of this requirement, human and traffic patterns, space allocations, a
manufacturing process or the patterns involved in the handling of materials etc.
• Area requirements will usually be established by the client and the architect/landscape architect in
consultation. Some clients have very definite ideas of what is required within the
building/landscape, other clients may need assistance in establishing adequate space
requirements.
Site Planning
• Site Planning may be required in the predesign stage to assess the suitability of the site against
the restraints of the budget and also against the client needs.
• To assess the site constraints and their effect on the design you may have to prepare a site
analysis and a site plan.
• You will need to draw up the site to scale and record all the information you have gathered on
your reconnaissance of the site and include information from the site surveyor and the
geotechnical engineer.
• You may have to assess the topography of the site against the type of development proposed.
• You may have to produce a drawing of the building envelope for the preparation of costings for the
establishment of the budget.
• You will need to assess and locate on site services and also the availability of services from
offsite.
• There may be environmental considerations and also ethical decisions to be made about the use
of the land, the preservation of features on the site etc.
All of the above criteria and issues particularly the site and authority requirements and constraints
need to be resolved early on in the process and therefore are included in the predesign stage.
Do not commence the schematic design stage until you have analysed the site and assessed the
requirements of the governing authorities.
If parameters are speculative, this Pre-Design work may take the form of a Feasibility Study
(see separate section)
The post PRE-DESIGN SERVICES appeared first on My Assignment Online.