School of Business
200918 Design Thinking for Creativity
Autumn 2020
Edition: Autumn 2020
Copyright ©2020 University Western Sydney trading as Western Sydney University ABN 53 014 069 881 CRICOS Provider No: 00917K No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without the prior written permission from the Dean of the School. Copyright for acknowledged materials reproduced
herein is retained by the copyright holder. All readings in this publication are copied under licence in accordance with Part VB of the Copyright Act 1968.
Unit Details
| Unit Code: | 200918 |
| Unit Name: | Design Thinking for Creativity |
| Credit Points: | 10 |
| Unit Level: | 3 |
| Assumed Knowledge: | Students should have a foundation knowledge of business markets and innovation theory. |
Note: Students with any problems, concerns or doubts should discuss those with the Unit Coordinator as early as they can.
Unit Coordinator
| Name: | Dr Tendai Chikweche |
| Phone: | 9685 9683 |
| Location: Parramatta City Campus | |
| Email: | t.chikweche@westernsydney.edu.au |
Consultation Arrangement:
By Appointment
Director of Academic Program
| Name: | Daniela Spanjaard |
| Phone: | 9685 9638 |
| Location: Parramatta City Campus | |
| Email: | d.spanjaard@westernsydney.edu.au |
Administrative Support
| Name: | Academic and Program Services team |
| Phone: | 9685 920 |
| Location: Parramatta City Campus | |
| Email: | business.courses@westernsydney.edu.au |
Liaison Librarian
| Name: | Paul Jewell |
| Phone: | 9685 9358 |
| Location: Parramatta City Campus | |
| Email: | p.jewell@westernsydney.edu.au |
Note: The relevant Learning Guide Companion supplements this document
Contents
1 About Design Thinking for Creativity 2
1.1 An Introduction to this Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 What is Expected of You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Changes to Unit as a Result of Past Student Feedback . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Assessment Information 4
2.1 Unit Learning Outcomes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Approach to Learning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 Assessment Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.4 Assessment Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4.1 Design Thinking Proposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.4.2 Design Thinking Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4.3 Innovation Report: Part 1 – Group report & Part 2 – In class presentation . . . . . . . . . . . 11
2.5 General Submission Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3 Teaching and Learning Activities 15
4 Learning Resources 17
4.1 Recommended Readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1
1 About Design Thinking for Creativity
1.1 An Introduction to this Unit
Innovation and creative thinking are important skills in strategy development. Part of this process is the ability
to solve problems and discover new opportunities; or in other words, the notion of “design thinking” . This unit
introduces students to concepts and frameworks to create innovative products, services and systems for a range of
enterprises, industries and markets. Students will explore and analyse business and social networks, clusters and
ecosystems via practice based projects. Design thinking principles will be applied to systematically develop ideas into
innovative solutions as a way to drive business growth.
1.2 What is Expected of You
Study Load
A student is expected to study an hour per credit point a week. For example a 10 credit point unit would require 10
hours of study per week. This time includes the time spent within classes during lectures, tutorials or practicals.
Attendance
It is strongly recommended that students attend all scheduled learning activities to support their learning.
Online Learning Requirements
Unit materials will be made available on the unit’s vUWS (E-Learning) site (https://vuws.westernsydney.edu.au/).
You are expected to consult vUWS at least twice a week, as all unit announcements will be made via vUWS. Teaching
and learning materials will be regularly updated and posted online by the teaching team.
Special Requirements
Essential Equipment:
None
Legislative Pre-Requisites:
Not Applicable
Policies Related to Teaching and Learning
The University has a number of policies that relate to teaching and learning. Important policies affecting students
include:
– Assessment Policy
– Bullying Prevention Policy and
– Guidelines
– Enrolment Policy
– Examinations Policy
– Review of Grade Policy
– Sexual Harassment Prevention Policy
– Special Consideration Policy
– Student Misconduct Rule
– Teaching and Learning – Fundamental Code
– Student Code of Conduct
2
Academic Integrity and Student Misconduct Rule
In submitting assessments, it is essential that you are familiar with the policies listed above and that you understand
the principles of academic integrity. You are expected to act honestly and ethically in the production of all academic
work and assessment tasks, submit work that is your own and acknowledge any contribution to your work made by
others.
Important information about academic integrity, including advice to students is available at https://www.westernsydney.
edu.au/studysmart/home/academic_integrity_and_plagiarism. It is your responsibility to familiarise yourself with
these principles and apply them to all work submitted to the University as your own.
When you submit an assignment or product, you will declare that no part has been: copied from any other student’s work or from any other source except where due acknowledgement is made in the assignment; submitted by
you in another (previous or current) assessment, except where appropriately referenced, and with prior permission
from the Unit Coordinator; written/produced for you by any other person except where collaboration has been authorised by the Unit Coordinator.
The Student Misconduct Rule applies to all students of Western Sydney University and makes it an offence for
any student to engage in academic, research or general misconduct as defned in the Rule.
The University considers plagiarism, cheating and collusion as instances of academic misconduct. The University
also considers submitting falsifed documentation in support of applications for special consideration, including sitting
of deferred examinations, as instances of general misconduct. You should be aware that changes were made to the
Student Misconduct Rule commencing 1 January 2020 that provide for minimum sanctions that apply to certain
conduct, including the provision of falsifed documentation to the University.
You are strongly advised to read the Student Misconduct Rule and the Inappropriate Behaviour Guidelines at the
commencement of each session to familiarise yourself with this process and the expectations of the University in
relation to work submitted for assessment.
1.3 Changes to Unit as a Result of Past Student Feedback
The University values student feedback in order to improve the quality of its educational programs. The feedback
provided helps us improve teaching methods and units of study. The survey results inform unit content and design,
learning guides, teaching methods, assessment processes and teaching materials.
You are welcome to provide feedback that is related to the teaching of this unit. At the end of the semester you will
be given the opportunity to complete a Student Feedback on Unit (SFU) questionnaire to assess the unit. You may
also have the opportunity to complete a Student Feedback on Teaching (SFT) questionnaire to provide feedback for
individual teaching staff.
As a result of student feedback, the following changes and improvements to this unit have recently been made:
– Changes have been made to the unit content covered and assessments to reflect emerging developments in the
unit and to spread the concepts covered evenly across the course content .This was also a response to some of
the student feedback .
3
2 Assessment Information
2.1 Unit Learning Outcomes
In line with its focus on achieving and assuring students’ skills in unit learning outcomes as listed below, this unit
is responsible for developing/assuring the following course-level learning outcomes (CLOs): CLO 3 Produce and
justify an argument in a professional or enterprise context using relevant, discipline-appropriate information (textual
or numerical) CLO 4 Propose a well-formulated solution to a professional or enterprise problem that considers wider
professional or enterprise contexts (including global) CLO 6 Evaluate economic, social, and environmental enterprise
and professional behaviour, and make recommenda- tions for responsible practice The table below outlines the unit
learning outcomes (ULOs) for this unit. Upon completion of this unit, students will be able to
| Outcome | |
| Assurance of Learning Information for Learning Guides The School of Business is currently working towards The Association to Advance Collegiate Schools of Business (AACSB) accreditation, an international business school accreditation. Address of the AACSB standards supports the School of Business to implement learning and teaching processes so that each course has learning goals that are relevant and appropriate. Additionally, the design and delivery of the curricula maximises the potential for students achieving expected course learning outcomes. Assurance of Learning (AoL) forms part of the accreditation standards for AACSB. Information regarding the Units that are involved in the AoL process for your course can be found at the following webpage https://www.westernsydney.edu.au/sob/business/accreditations/aol/assurance_of_learning |
|
| 1 | Critically analyse innovation in different enterprise or social contexts |
| 2 | Evaluate the practice and protocols of professional and social networks |
| 3 | Use creativity and innovation to solve strategic business markets problems |
| 4 | Demonstrate the process of creative thinking |
2.2 Approach to Learning
The unit will adopt a blended learning approach. Further details are provided in the schedule of teaching activities.
Unit materials will be made available on the unit’s vUWS (E-Learning) site (https://vuws.westernsydney.edu.au/).
You are expected to consult vUWS at least twice a week, as all unit announcements will be made via vUWS. Teaching
and learning materials will be regularly updated and posted online by the teaching team.
4
2.3 Assessment Summary
The assessment items in this unit are designed to enable you to demonstrate that you have achieved the unit
learning outcomes. Completion and submission of all assessment items which have been designated as mandatory or
compulsory is essential to receive a passing grade.
To pass this unit you must:
– Complete all assessments- Achieve an overall mark of at least 50 per cent. NB: Assessment 2 has a threshold
mark of 50%, ie. you are required to achieve a minimum 50% mark for this assessment and an overall pass mark (at
least 50%) in order for you to pass the unit. –
| Item | Weight | Due Date | ULOs Assessed | Threshold |
| Design Thinking Proposal | 25% | Week 6 | 1, 4 | No |
| Design Thinking Project | 45% | Week 10 | 3-4 | Yes |
| Innovation Report: Part 1 – Group report & Part 2 – In class presentation |
30% | Week 13 | 1-4 | No |
Feedback on Assessment
Feedback is an important part of the learning process that can improve your progress towards achieving the learning
outcomes. Feedback is any written or spoken response made in relation to academic work such as an assessment
task, a performance or product. It can be given to you by a teacher, an external assessor or student peer, and may
be given individually or to a group of students. As a Western Sydney University student, it is your responsibility to
seek out and act on feedback that is provided to you as a resource to further your learning.
Note: Before you receive your results for each piece of assessment they may be moderated. Moderation is a process
whereby the unit coordinator regulates the marking of individual markers to achieve consistency in the application
of unit objectives, performance standards and marking criteria. You should note that, consistent with the Criteria
and Standards Based Assessment policy, the fnal marks for the cohort may be also adjusted if marks are very high
or low or there are inconsistencies between teams. Marks for an individual piece of assessment will not be changed
after you have your moderated results. Note: It is required that students attempt all available assessment elements.
An automatic Fail Non – Submis- sion grade will be awarded if any assessment task is not submitted/completed as
per the details specifed.
5
2.4 Assessment Details
2.4.1 Design Thinking Proposal
| Weight: | 25% |
| Type of Collaboration: | Individual |
| Due: | Week 6 |
| Submission: | The report should not exceed 1,000 words(+ or – 10%, using size 12 point font with 1.5 line spacing format. Essays must be fully and accurately referenced or they will not be graded. Students should aim for a 10 per cent to 15 per cent Turnitin similarit |
| Format: | Word Document |
| Length: | 1,000 words equivalency |
| Curriculum Mode: | Proposal |
Overview
Design Thinking (DT) is a fairly new concept having been predominantly used by designers who developed specifc
principles methods and tools to direct their general design work. However, the concept is now widely used in business
as a key strategic tool. You are in a unique position of exploring this growing approach. This assessment requires
you to critically review the application of one of the three DT Approaches by an organization of your choice. Such
that it can be used as an exemplar to demonstrate the innovative opportunities that DT provides for businesses to
address a variety of challenges and opportunities.
Details
Using an organization of your choice the 1000-word document should :
1. Provide rationale for your choice of organization
2. Identify and critically review the potential use of one of the following DT Approaches by your organization:
– 3I Model
– Liedtka 4 Question Model
– Service Design Thinking Model
3. Outline and critique the key Design Thinking principles that are demonstrated by the organization which are
relevant to your selected approach.
4. Outline the potential business challenges faced by the organization which can be addressed/solved by the DT
approach you selected.
Resources:
Learning Material and Readings
6
Marking Criteria:
| CRITERIA | EXPECTATIONS NOT MEET | MEETS EXPECTATIONS | EXCEEDS EXPECTATIONS |
| Identifcation of organization and rationale for selection. |
No identifcation of an organization. |
Good identifcation of an organization with minimal rationale. |
Comprehensive identifcation and discussion of rationale for organization selection. |
| 0-1 | 2 | 3 | |
| Selection and justifcation of Design Thinking Approach from the three options |
No identifcation and justifcation of an approach |
Good identifcation and justifcation of an approach |
Comprehensive identifcation and justifcation of an approach |
| 0-2 | 3-5 | 6-7 | |
| Identifcation and critique of key DT principles. |
Limited/minimal identifcation and critique of key DT principles. |
Good detailed identifcation and critique of key DT principles. |
Outstanding identifcation and discussion highlighting a clear and insightful demonstration of key DT principles. |
| 0-2 | 3-5 | 6-7 | |
| Identifcation and understanding of the potential business challenges faced by the organization. |
Limited/minimal identifcation of the potential business challenges faced by the organization. |
Good detailed identifcation and demonstration of the potential business challenges faced by the organization. |
Outstanding identifcation and discussion highlighting a clear and insightful demonstration of potential business challenges faced by the organization. |
| 0-2 | 3 | 4-5 | |
| Use writing style appropriate to purpose, context and audience Use relevant sources and correct referencing. |
Use of language and format indicates minimal attention has been paid to the context, audience and purpose of the assigned writing task. Sources are not appropriately identifed and acknowledged. Text demonstrates little or no evidence of crediting. |
Use of language and format indicates adequate consideration has been paid to the context, audience and purpose of the assigned writing task. Sources are generally identifed and acknowledged with some minor inaccuracies in referencing. Text shows some evidence of referencing. |
Use of appropriate format and discipline-specifc language indicates a comprehensive understanding of the context, audience and purpose of the assigned task. Sources are well-chosen and are accurately identifed and acknowledged in the approved referencing style. Text shows evidence of thorough and comprehensive editing. The level of presentation meets the professional standards of the discipline. |
| 0-1 | 2 | 3 |
7
2.4.2 Design Thinking Project
| Weight: | 45% |
| Type of Collaboration: | Individual |
| Due: | Week 10 |
| Submission: | The report should not exceed 2,000 words(+ or – 10%, using size 12 point font with 1.5 line spacing format. Essays must be fully and accurately referenced or they will not be graded. Students should aim for a 10 per cent to 15 per cent Turnitin score. |
| Format: | Word Document |
| Length: | 2,000 words equivalency |
| Curriculum Mode: | Report |
| Threshold Detail: | This assessment has threshold of 50%. In other words you are required to score at least 50% on this assessment and have an overall mark of at least 50% for all assessments combined. |
Overview
Elements of creativity and innovation underpin Design Thinking approaches outlined in this unit that businesses
use to introduce alternative ways of developing solutions to the variety of challenges constantly being faced in the
dynamic modern business environment. This assessment reinforces the importance for frms to conduct business
in a responsible manner considering the impact of macro-environmental forces. This has to be integrated in the
recommendations for innovation forms. The challenge of this task is for you to harness different components of these
concepts in order to demonstrate your insight of the creative process and its important role.
Note: This assessment task assures course learning outcomes 3 ,4 and 6.
Details
Your Task
Using a real life organization as your reference:
1. Identify how your organization can develop some new forms of creativity to improve competitiveness.
2. Identify and justify the potential source(s) for this new recommended creativity.
3. Critically review the potential creativity blocks that could be a barrier for the organization’s creativity initiatives
4. What creativity stimulating techniques can the organization use to improve creative effort?
5. What forms of innovation have been used to facilitate creativity in this organization? What would you do differently? Consider implications of the global and domestic macro-forces on the design of your recommendations
in order to ensure the recommendations reflect a responsible approach to conducting business.
Resources:
Learning Material and Readings
8
Marking Criteria:
| CRITERIA | EXPECTATIONS NOT MEET | MEETS EXPECTATIONS | EXCEEDS EXPECTATIONS |
| Identifcation of an organization and rationale for selection. |
No identifcation of an organization. |
Good identifcation of an organization with minimal rationale. |
Comprehensive identifcation and discussion of an organization with detailed rationale for selection. |
| 0 | 1-2 | 3-4 | |
| CLO 3.1 Explain topic to be considered critically in logically structured manner using suffcient information needed for understanding for the creativity blocks that could impact on the frm’s creativity. |
Shows insuffcient understanding of the topic identifcation and justifcation of creativity blocks. |
Explains topic and organises information appropriately to justify the creativity blocks. |
Explains topic critically, its context & variables comprehensively. Identifes ambiguities and uncertainties in discussion of creativity blocks. |
| 0.00-0.66 | 0.67-1.33 | 1.34-2.00 | |
| CLO 3.2 Analyse information to determine validity of different points of view and evidence as well as identify bias, faulty reasoning and assumptions. |
Systematically and methodically analyses discipline experts’ viewpoints and evidence, identifying bias, problematic reasoning and assumptions |
Provides analysis of discipline specifc viewpoints which is accurate and valid with minor omissions. |
Provides an analysis but limited relevant discipline expert information. Some inaccuracies or omissions impact the analysis and understanding. |
| 0.00-0.66 | 0.67-1.33 | 1.34-2.00 | |
| CLO 3.3 Present a point of view supported by evidence, clear reasoning and justifcation including assumptions and influence of context well-articulated. |
Presents a point of view that is unclear and no justifcation |
Presents a sound point of view with good justifcation, synthesising other approaches. Mostly acknowledges limits and/or context of position. |
Presents well supported, insightful and justifed point of view synthesizing various other points of view and highlighting limits and/or context of position. |
| 0.00-0.33 | 0.34-0.66 | 0.67-1.00 | |
| CLO 4.1 Defne a well-formulated problem and application of the tools the brand can utilize domestically and globally using new forms of creativity. |
Superfcial problem statement. Does not Include consideration of relevant contextual factors and application of the tools the brand can utilize domestically and globally using new forms of creativity. |
Problem statement is clear. Includes consideration of most relevant contextual factors and application of the tools the brand can utilize domestically and globally using new forms of creativity. |
Clear and insightful problem statement. Includes consideration of all relevant contextual factors and the tools the brand can utilize domestically and globally using new forms of creativity. |
| 0.0-3.0 | 3.1-6.0 | 6.1-9.0 | |
| CLO 4.2 Identify strategies and propose solutions and applications of the tools the brand can utilize domestically and globally using new forms of creativity. |
Identifes an approach for solving the problem that is diffcult to evaluate because it is vague or only indirectly addresses the problem statement. |
Identifes multiple approaches for solving the problem and proposes a solution that indicates some comprehension of the problem. Includes an evaluation of the solutions that considers some of; the history of the problem, logic/reasoning, feasibility and impacts. |
Identifes multiple approaches for solving the problem and proposes a solution that indicates a deep comprehension of the problem. Includes an elegant rationale for the solutions that deeply and thoroughly considers the history of the problem, logic/reasoning, feasibility and impacts |
| 0.0-1.0 | 1.1-2.0 | 2.1-3.0 | |
| Identifcation and understanding of potential source(s) for this creativity. |
Limited/minimal identifcation and understanding of potential source(s) for this creativity. |
Good detailed identifcation of potential source(s) for this creativity. |
Outstanding demonstration and discussion of potential source(s) for this creativity. |
| 0-3 | 4-6 | 7-8 | |
| Identifcation and application of’ techniques that Stimulate Creativity. |
Limited/minimal identifcation and application of techniques that Stimulate Creativity. |
Good detailed identifcation and application of’ techniques that Stimulate Creativity. |
Outstanding demonstration and application of’ techniques that Stimulate Creativity. |
| 0-2 | 3 | 4-5 | |
| CLO 6.1 Analyse economic, social and environmental (CSR) enterprise and professional practice using appropriate policy/framework/guidelines/laws of the innovation that take the macro-environmental forces into consideration |
Does not formulate a course of action suitable for CSR contexts of the innovation that takes the macro-environmental forces into consideration |
Applies CSR knowledge to analyse enterprise or professional practice with some justifcation of implications of the innovation that take the macro-environmental forces into consideration and propose recommendations that ensure responsible practice. |
Insightful application of CSR knowledge to analyse enterprise or professional practice providing strong justifcation of the implications of the innovation that take the macro-environmental forces into consideration |
| 0.00-1.33 | 1.34-2.66 | 2.67-4.00 | |
| CLO 6.2 Analyse economic, social and environmental (CSR) enterprise and professional practice using appropriate policy/framework/guidelines/laws of the innovation that take the macro-environmental forces and propose recommendations that ensure responsible practice. |
Does not formulate a course of action suitable for CSR contexts. |
Recommends a course of action suitable to relevant CSR contexts in enterprise or professional practice, with justifcation for the recommendations that ensure responsible practice. |
Recommends insightful course of action suitable to CSR context in enterprise or professional practice with broad consideration of the context and with strong justifcation for the recommendations that ensure responsible practice. |
9
| CRITERIA | EXPECTATIONS NOT MEET | MEETS EXPECTATIONS | EXCEEDS EXPECTATIONS |
| 0.00-1.33 | 1.34-2.66 | 2.67-4.00 | |
| Use writing style appropriate to purpose, context and audience Use relevant sources and correct referencing. |
Use of language and format indicates minimal attention has been paid to the context, audience and purpose of the assigned writing task. Sources are not appropriately identifed and acknowledged. Text demonstrates little or no evidence of crediting. |
Use of language and format indicates adequate consideration has been paid to the context, audience and purpose of the assigned writing task. Sources are generally identifed and acknowledged with some minor inaccuracies in referencing. Text shows some evidence of referencing. |
Use of appropriate format and discipline-specifc language indicates a comprehensive understanding of the context, audience and purpose of the assigned task. Sources are well-chosen and are accurately identifed and acknowledged in the approved referencing style. Text shows evidence of thorough and comprehensive editing. The level of presentation meets the professional standards of the discipline. |
| 0-1 | 2 | 3 |
10
2.4.3 Innovation Report: Part 1 – Group report & Part 2 – In class presentation
| Weight: | 30% |
| Type of Collaboration: | Both (Individual & Group) |
| Due: | Week 13 |
| Submission: | The report should not exceed 2,000 words(+ or – 10%, using size 12 point font with 1.5 line spacing format. Essays must be fully and accurately referenced or they will not be graded. Students should aim for a 10 per cent to 15 per cent Turnitin similarit |
| Format: | Word Document and presentation |
| Length: | Part 1: Group report 2,000 words (20%) & Part 2: In class presentation 15 minutes (10%) |
| Curriculum Mode: | Report |
Part 1: Group Report 20%
Overview
The group project will involve students working in groups to develop a new innovation that can either be:
1. A new tangible product
2. A new service
3. A business idea
4. A process
The new innovation has to be in any sector of your choice. Note :The unit coordinator may provide a list of sectors
from which you can choose one for your project.
The project will address the following:
1. What is ’new and innovative ’about the suggested innovation?
2. What form of innovation does the suggested innovation idea assume?
3. Outline and apply a relevant component of Sustainability Led innovation (SLI) to your concept What are the
potential disrupters for the innovation?
4. What mitigating strategies can be used to manage the potential disruption?
11
Marking Criteria:
| CRITERIA | EXPECTATIONS NOT MEET | MEETS EXPECTATIONS | EXCEEDS EXPECTATIONS |
| Clear articulation of a new innovation targeting a specifc sector with well-defned parameters of what is new about the innovation. |
Unclear identifcation of the new innovation and limited parameters. |
Good identifcation of the new innovation and parameters. |
Comprehensive identifcation and discussion highlighting a clear and insightful new innovation and its parameters. |
| 0-2 | 3 | 4-5 | |
| Clear articulation and demonstration of a relevant component of Sustainability Led innovation(SLI) to your concept |
Limited/minimal articulation and demonstration of a relevant component of Sustainability Led innovation(SLI) |
Good detailed identifcation and demonstration a relevant component of Sustainability Led innovation(SLI) to your concept |
Outstanding identifcation and discussion highlighting a clear and insightful demonstration of a relevant component of Sustainability Led innovation(SLI) to your concept |
| 0-2 | 3 | 4-5 | |
| Identifcation and understanding of the innovation forms and potential disruptors of the innovation. |
Limited/minimal identifcation of the innovation forms and potential disruptors of the innovation. |
Good detailed identifcation and demonstration of an understanding of the innovation forms and potential disruptors of the innovation. |
Outstanding identifcation and discussion highlighting a clear and insightful demonstration of an understanding of market development, of the innovation forms and potential disruptors of the innovation. |
| 0-2 | 3 | 4-5 | |
| Clear articulation and discussion of recommendations for mitigating strategies for the potential disruptors. |
Limited/minimal articulation and discussion of recommendations for mitigating strategies for the potential disruptors. |
Good detailed demonstration and discussion of recommendations for mitigating strategies for the potential disruptors. |
Outstanding demonstration and discussion of recommendations for mitigating strategies for the potential disruptors. |
| 0-2 | 3 | 4-5 | |
| Structure, clarity & quality of presentation materials. |
Session lacks structure, is not clear to listen or to watch and has low impact on the audience. Presentation does not cover all the required components of the project. |
Session has a basic to good structure and logical flow, with variations of impact on the audience. Presentation attempts to cover all the required components of the project. |
Outstanding structure with effective and creative slides and communication. Key messages are clear and creatively communicated to the audience by the end of the presentation. Presentation covers all the required components of the project. |
| 0-2 | 3-5 | 6-7 | |
| Presentation management skills. | Presenter is disorganised in terms of time management and communicating the presentation. |
Presenter exhibits basic organization but delivery is marginal and inconsistent. Presenter is organised with Good allocation of parts of the presentation but delivery is basic with some inconsistency in parts of the presentation. |
Presenter is well organised and discussion is consistent, effective with a strong and effective wrap-up. Presentation time-management is effective. Presenter delivers a seamless, well-timed presentation with an outstanding wrap-up. |
| 0-1 | 2 | 3 |
12
2.5 General Submission Requirements
Submission
– All assignments must be submitted by the specifed due date and time.
– Complete your assignment and follow the individual assessment item instructions on how to submit. You must
keep a copy of all assignments submitted for marking.
Turnitin
– The Turnitin plagiarism prevention system may be used within this unit. Turnitin is accessed via logging into
vUWS for the unit. If Turnitin is being used with this unit, this means that your assignments have to be
submitted through the Turnitin system. Turnitin from iParadigms is a web-based text-matching software that
identifes and reports on similarities between documents. It is also widely utilised as a tool to improve academic
writing skills. Turnitin compares electronically submitted papers against the following:
– Current and archived web: Turnitin currently contains over 24 billion web pages including archived pages
– Student papers: including Western Sydney University student submissions since 2007
– Scholarly literature: Turnitin has partnered with leading content publishers, including library databases,
text-book publishers, digital reference collections and subscription-based publications (e.g. Gale, Proquest, Emerald and Sage)
– Turnitin is used by over 30 universities in Australia and is increasingly seen as an industry standard. It is
an important tool to assist students with their academic writing by promoting awareness of plagiarism.By
submitting your assignment to Turnitin you will be certifying that:
– I hold a copy of this assignment if the original is lost or damaged
– No part of this assignment has been copied from any other student’s work or from any other source except
where due acknowledgement is made in the assignment
– No part of the assignment has been written for me by any other person/s
– I have complied with the specifed word length for this assignment
– I am aware that this work may be reproduced and submitted to plagiarism detection software programs for
the purpose of detecting possible plagiarism (which may retain a copy on its database for future plagiarism
checking).
Self-Plagiarising
– You are to ensure that no part of any submitted assignment for this unit or product has been submitted by
yourself in another (previous or current) assessment from any unit, except where appropriately referenced, and
with prior permission from the Lecturer/Tutor/Unit Co-ordinator of this unit.
Late Submission
– If you submit a late assessment, without receiving approval for an extension of time, (see next item), you will
be penalised by 10% per day for up to 10 days. In other words, marks equal to 10% of the assignment’s weight
will be deducted from the mark awarded.
– For example, if the highest mark possible is 50, 5 marks will be deducted from your awarded mark for each late
day.
– Saturday and Sunday are counted as one calendar day each.
– Assessments will not be accepted after the marked assessment task has been returned to students.
– This is consistent with Clause 51 of the Western Sydney University’s Assessment Policy – Criteria and StandardsBased Assessment.
13
Extension of Due Date for Submission
Extensions are only granted in exceptional circumstances. To apply for an extension of time, locate an application
form via the Western Sydney University homepage or copy the following link:
https://www.westernsydney.edu.au/currentstudents/current_students/forms
Application forms must be submitted to the Unit Coordinator/Convenor. Requests for extension should be made as
early as possible and submitted within policy deadlines. Appropriate, supporting documentation must be submitted
with the application. An application for an extension does not automatically mean that an extension will be granted.
Assessments will not be accepted after the marked assessment task has been returned to students.
Resubmission
Resubmission of assessment items will not normally be granted if requested.
Application for Special Consideration
It is strongly recommended that you attend all scheduled learning activities to support your learning. If you have
suffered misadventure, illness, or you have experienced exceptional circumstances that have prevented your attendance
at class or your completion and submission of assessment tasks, you may need to apply for Special Consideration via the
Western Sydney University website. http://www.westernsydney.edu.au/currentstudents/current_students/services_
and_facilities/special_consideration2 or the Student Centre/Sydney City Campus Reception. Special Consideration
is not automatically granted. It is your responsibility to ensure that any missed content has been covered. Your
lecturer will give you more information on how this must be done.
14
3 Teaching and Learning Activities
| Weeks | Topic | Activities | Assessments Due |
| Week 1 02-03-2020 |
Re-visiting Design Thinking Conceptualising Design Thinking Design Thinking Principles |
Introduction to unit Lecture Pod Design Thinking Challenge-(DTc1) Design Thinking In Action-(DTIa1) Personal Introduction Thread |
|
| Week 2 09-03-2020 |
Design Thinking principles and tools DT Business Challenges and Solutions Design Thinking Tools |
Weekly Concept Checklist Design Thinking Challenge-(DTc3) |
|
| Week 3 16-03-2020 |
Design Thinking Approaches Part 1 | Weekly Concept Checklist Design Thinking In Action-(DTIa1)-video Design Thinking In Action-(DTIa2-video |
|
| Week 4 23-03-2020 |
Design Thinking Approaches Part 2 | Weekly Concept Checklist Design Thinking In Action-(DTIa2)-video Design Thinking Challenge-(DTc1) Reflective Journal |
|
| Week 5 30-03-2020 |
Design Thinking Approaches Part 3 | Weekly Concept Checklist Design Thinking In Action-(DTIa1)-video Design Thinking In Action-(DTIa2)Video Collaborative Discussion Thread |
|
| Week 6 06-04-2020 |
The Creative Process Sources of Creativity Creative techniques |
Weekly Concept Checklist Design Thinking Challenge-(DTc1): |
– Design Thinking Proposal |
| Week 7 13-04-2020 |
Innovation and Creativity An introduction to the innovation process Creativity and Innovation |
Weekly Concept Checklist Design Thinking In Action-(DTIa1)-video Collaborative Discussion Thread |
|
| Week 8 20-04-2020 |
Disruptive Innovation Principles of Disruptive Innovation |
Weekly Concept Checklist Design Thinking Challenge-(DTc1) Design Thinking In Action-(DTIa1)- |
|
| Week 9 27-04-2020 |
Break | Break | |
| Week 10 04-05-2020 |
Sustainability led Innovation Creating New Market Spaces |
Design Thinking In Action-(DTIa1)-video Design Thinking In Action-(DTIa2)Video |
– Design Thinking Project |
| Week 11 11-05-2020 |
Creating and Understanding Customer Value Re-thinking Competitive Dimensions |
Weekly Concept Checklist Design Thinking In Action-(DTIa1)-video |
|
| Week 12 18-05-2020 |
Responsible Innovation and Design Thinking | Weekly Concept Checklist Design Thinking In Action-(DTIa1)-video |
15
| Weeks | Topic | Activities | Assessments Due |
| Week 13 25-05-2020 |
Thinking for Entrepreneurs in Small businesses-Bootstrapping |
Weekly Concept Checklist Group project preparation | – Innovation Report: Part 1 – Group report & Part 2 – In class presentation |
| Week 14 01-06-2020 |
Innovation Group Project | Innovation Group Project Presentations | |
| Week 15 08-06-2020 |
Stuvac | Stuvac | |
| Week 16 15-06-2020 |
Exams | Exams | |
| Week 17 22-06-2020 |
Exams | Exams |
The above timetable should be used as a guide only, as it is subject to change. Students will be advised of any changes as they become known on the unit’s vUWS site.
16
4 Learning Resources
4.1 Recommended Readings
Prescribed Textbook
There are no prescribed textbooks for this unit. A custom publication and/or set of readings and links will be provided
under the “Readings and Resources” link on vUWS in association with UWS Library E-resources.
Essential Reading
The Library and the School have assessed the learning outcomes for the unit. The conclusion is that the Library’s
existing collections are suffcient to support this unit, noting that further consultations regarding resources accessed
through vUWS sites will occur prior to 2016.
Additional Reading
Johansson-Sköldberg, U, Woodilla, J & Çetinkaya, M 2013, ’Design thinking: past, present and possible futures’,
Creativity and Innovation Management, vol. 22, no. 2, pp. 121-146.
Liedtka, J 2014, ’Innovative ways companies are using design thinking’, Strategy and Leadership, vol. 42, no. 2, pp.
40-45.
West, H 2014, ’A chain of innovation: the creation of swiffer’, Research Technology Management, vol. 57, no. 3,
pp. 20-23.
Worth, M 2013, ’Thinking innovation’, B & T Weekly, March 15, 2013.
17
The post 200918 Design Thinking for Creativity appeared first on My Assignment Online.