Identify and describe any key agencies or institutions that govern work health safety inthis type of working environment, and any policies that are relevant to maintaining a safe work environment (policies can be organisational, discipline-specific and/or national).
Summarise the findings of your work health safety assessment, including details relevant to managing risk for vulnerable populations, and provide recommendations to resolve the work safety risks identified.
Write UP -Soft Technologies Of Surveillance – Assignment
TASK
Define and explain the key characteristics of ‘soft technologies’ and ‘hard technologies’ in law enforcement as discussed by Byrne and Marx (2011). Provide one example of a ‘hard’ technology of surveillance, and one example of a ‘soft’ technology of surveillance.
Explain how only one of these examples (‘hard’ or ‘soft’) relates to a strategy of ‘pre-emptive’ policing in crime control.
Based on the one example you choose, critically evaluate the ‘effectiveness’ of the use of the surveillance technology. Does it fulfill the objective that it is being used for? What challenges to privacy, fairness, and/or ethics does it pose?
Gender Stereotyping – Essay Writing
TASK
Discuss gender stereotyping, with references to portrayals of gender in the media.
Professional Research And Communication- Research Questions – Essay Writing
TASK1
Section on research on your topic of your choice. You should find at least four academic papers on your particular topic and provide a literature review. Think carefully about your choice of papers – they should be chosen from reputable sources (be wary of online journals which claim to be peer-reviewed but are actually of very low-quality). This review should be more than just a summary of each paper – it should be a synthesis of the most important parts and how they relate. Some things you might look at are
o How the research questions compare
o What the motivations of the researchers were
o What type of research they conducted
o Anything else of interest
Please remember that you must NOT include large slabs of text from the papers you read. The essay must be in your own words. If you use quotes from papers you have read, these must be clearly marked as quotes. If you use ideas from papers you have read, even re-written in your own words, you must appropriately cite those papers.
Submit this part to part A on Moodle. If you worked in pairs only one copy of the assignment should be submitted and it should clearly contain the names of both contributors.
TASK2
This section must be done individually. Provide your own personal thoughts about the topic which you selected – this might address both the benefits and negatives of this application of technology, as well as speculation about the future developments in this topic.
Communication – EIR network – Assignment
TASK
Recently the EIR network encountered a major fault which resulted in a large number of customers being without Internet, TV, Landline and Mobile Services. There were a number of complaints about the lack of communication and updates from the company. You are required to conduct a thorough analysis of the matter from the perspective of Communiqués from EIR (what did they do well? what did they NOT do well? how effective was their communications?
Law Essay – Swimming Pools Act NSW – Jarvis v Swans Tours Ltd Assignment
TASK1
Locate the Swimming Pools Act NSW (1992) and then:
Identify the section which you would refer to for information about legal requirements of outdoor swimming pools in the backyard of a house in Sydney.
Would your answer be different for a swimming pool in the backyard of a house in Perth? Why?
List the elements of the first sub-section in the section you have identified. (It is not necessary to provide definitions for these elements.)
TASK2
Read Jarvis v Swans Tours Ltd [1973] QB 233. This is an appeal in a matter where there is a contract between Mr Jarvis and Swans Tours, and this contract has been breached. After reading the case, answer the following questions:
What is the correct citation? (Are there any alternative citations?)
Who is the Appellant? Who is the Respondent?
At first instance:
Who was the Plaintiff?
Who was the Defendant?
Who was the Judge?
In which court was the case decided?
When was the case heard and when was it decided? Was judgement reserved? What is your reason for this answer?
Who were the judges in the case?
Who represented each party in the case – solicitors and barristers?
What are the relevant facts? (What facts will it be necessary to consider when framing or using the ratio from this case?)
What are the issues of law?
Are there any issues of fact? If not, why not?
What is the ratio decidendi?
What are the obiter dicta (if any)?
What cases were distinguished?
Was the decision in Griffiths v Evans followed? Why? Why not?
Explain the Glyndebourne example referred to by Lord Denning.
What was the decision?
TASK3
Minister for Immigration and Border Protection v WZARH (2015) 256 CLR 326
WZARH entered Australia at Christmas Island without a visa on 7 November 2010? He was a citizen of which country at the time?
WZARH claimed that he was denied procedural fairness during his claim for refugee status. Did the High Court agree?
At whatpagein the above cited law report does the judgment of Gageler and Gordon JJ commence?
Re Estate of Wai Fun Chan, Deceased [2015] NSWSC 1107
1.What was the date of this judgment?
2.In this case the court had to decide whether to admit a will made by video to probate. Did the court allow it?
3.In which room in the house was the video filmed?
Clinton v J Lyons & Co Ltd [1912] 3 KB 198
1.Who were the judges in this case?
2.In this case, the plaintiff claimed damages for personal injuries and for injuries to a dog which she owned. What was alleged to have caused these injuries?
3.Was the plaintiff’s claim successful?
TASK4
This question is in two parts:
What is “IRAC”? Explain each element of IRAC. How and when you would use it?
Apply IRAC to resolve the below factual situations:
Using ONLY the case Jarvis v Swans Tours Ltd [1973] QB 233 advise Jamie in the below fact situation. You are expected to use the ratio of Jarvis v Swans Tours Ltd [1973] QB 233 to resolve the below fact situation and any other aspects of the decision which may be relevant (such as the facts of the case).
Management – Three Clients – Scenario Portfolio Assignment
TASK1
1. Identify the assessment tools you woulduse to assess the client’s needs.
2. Explain how you would gather all existinginformation relevant to the client’s situation.
3. Name two (2) websites or informationsources (e.g. specialist networks or services) where you could seek additional information about the client and their range of issues. Specifically:
o Identify from whom / where you would seek this information and why it is relevant.
o Where applicable, construct an email request for additional information from another service. Your email should follow the organisation’s guidelines regarding privacy, consent, confidentiality and disclosure.
4. Describe what you would say to the clientwhen arranging for them to come in for their assessment interview. Specifically address:
o The referral received and, whererelevant, any identified risks in the referral and strategies to mitigate these risks.
o Information about the assessment process including responsibilities of the participants.
o The practical aspects of theassessment including time/place suitable to both parties and any cultural considerations.
5. Explain the legal and ethical considerations
TASK2
This event requires you to submit a portfolio of evidence that demonstrates your ability to assess client needs.
This event builds on event 1, and additional information provided in Scenario B. Your evidence must include the following items:
Email to supervisor
Psychosocial assessment
These items must address the criteria as listed below.
1.Email to supervisor Write an email to your Indigo supervisor
1.The strategies/techniques you will use to:
o empower the client to identify and prioritise their own needs
o work with the client using a collaborative approach o encourage the client to advocate on their own behalf to access services
2. The steps you will take to evaluate issues of urgency and eligibility and potential risk factors.
3. Details of what you consider to be outside your own scope of practice and where you may need to seek assistance from colleagues and experts.
4. An outline of your process for evaluating the internal capabilities of your organisation (Indigo) and other service networks to determine the best fit for the client.
5. The service information you will provide to the client to support their decision making process.
2.Psychosocial assessment Complete an Indigo Psychosocial Assessment form for Client 1: Souhalia.
Your completed assessment must meet the following criteria:
1.All sections of the Psychosocial assessment form must be completed.
2. Include all available background information about Souhalia.
3. Clearly identify the presenting issues and concerns.
4. Identify the client goals according to the priority/urgency of their needs.
5. Identify the ‘best fit’ options for Souhalia
TASK3
Evaluation plan
Write a plan for each of your three clients outlining how you will collect feedback and monitor processes.
Your plan must:
1.Describe a method you would use for collecting feedback from the client about the assessment and referral process. Specifically:
o List three (3) benefits of this method
o Discuss the appropriateness of the method for the client
2. Describe how you would monitor the effectiveness of processes and their outcomes for the client. Specifically:
o List three (3) indicators of success in meeting the client’s needs
o Describe how you will monitor the process and outcomes
Responses to the short answer questions
This item must address the criteria as listed below.
TASK4
Responses to the short answer questions Respond to each of the questions provided and submit your answers on the Short answer questions template. All responses must:
1. Provide detail addressing all parts of each question with examples as appropriate.
2. Use clear and concise language to ensure the intended meaning is understood.
3. Provide references to the source of information, as relevant.
Management – PE House – KTM – Report Assignment
TASK
Your PE House has been approached to purchase BC’s shareholding in KTM. You have been asked by the Investment Director to prepare a report on KTM for your Investment Committee, with a buy recommendation containing the following elements:
Investment Hypothesis.
Market review of the sector.
Cash Flow: Cash flow forecast for the next 4 years, to assess the level of free cash flow after projected capex:
1) Which must be used to service existing,
2) Plus any additional debt which may be used in the purchase of BC’s shareholding.
3) You are also required to assess any potential cash shortfall to finance the company’s capital expenditure plan.
Enterprise Value:
Provide a current Enterprise Value (EV) analysis, with reasons for the means of valuation chosen. You will then calculate the equity value, and hence value BC’s holding.
Deal Structure:
Consider the structure of your investment, in terms of the debt/equity split. It is important that any debt which you employ can be serviced by the free cash flow from the 4 year cash flow analysis.
Exit and Return:
Estimate the EV at the point of exit, and hence the equity value of your investment at exit, in order to provide the IC with visibility of the money multiple and IRR on the investment.
Exit Options:
Provide the investment committee with a review of possible exit options, and consider which might be most advantageous for the PE House.
Design For Manufacture – Manufacturing Technician – Economic Manufacture Of A Product- Report Writing Assignment
TASK
Scenario
You are employed as a manufacturing technician with a local engineering company and have been assigned to an integrated product team who are reviewing the design of their products. You will investigate an assembly of components, being one of your company’s products and will make suggestions for improvements to the product taking into account the principles for design for economic manufacture.
Within your workplace, find a simple assembly, or sub-assembly, which consists of 4-6 components in total. This will be the product that you review during this assignment. You will conduct a value analysis of that product
Task 1
a) As an introduction to your report, take a photograph or produce a diagram of your assembly and label the diagram to show the name of each of the components. Produce a short written explanation on what your assembly is, its function, briefly explaining how the assembly is manufactured.
b) In your value analysis use appropriate headings to identify each of your 4-6 components, including fixings.
Examine the product and identify why each component is manufactured the way it is; you should consider the design form, material type and properties, quality requirements, manufacturing equipment and process, processing capability, costs, skills of labour force in the workplace, the impact on environment.
c) Produce a speculation on the alternative methods of producing these components, you should consider function, geometry, manufacture and materials. Consider the principles of value analysis and identify any improvements you recommend to introduce the most appropriate manufacturing methods for the product.
Task 2
Write an explanation of the advantages and disadvantages of using standardised components on your product by considering how your assembly utilises product standardisation. Any test standards that the component must comply with should also be identified.
You should consider each of the following:
use of standard components, parts and fittings
use of preferred numbering methods for standardisation and for quality identity
design, development, tooling, planning, choice, labour, ease of replacement
inter-changeability of parts and tooling and the related costs
BS, ISO, EN and any other test standards your components need to withstand.
Task 3
For the assembly in task 1, choose one component (typically the base component) and using a design analysis software determine the following.
a) Use a suitable software to analyse the materials used to produce this component. Identify appropriate criteria that your material should meet, e.g. strength, weight, durability etc.
b) Use the software to identify an alternative material that this component could be made from.
c) Using the software determine an appropriate manufacturing process for each of these materials.
d) Identify which of the materials/processes you would use in preference to the other and why.
Task 4
a) In task 1 you will clearly identify evidence that you have taken an effective approach to the study using value analysis techniques, you will also have evidence of research during the completion of these tasks.
This meets the criteria for M1
b) In task 2 you will explain how you have applied relevant theories and techniques during the completion of this task. You will have addressed all areas of the task using appropriate methods and will have made an appropriate recommendation regarding the safety margin, in respect of the order that has been requested and the company’s policy for its safety margin.
This meets the criteria for M2
c) Throughout this assignment it is expected that you use range of methods to present your work with an appropriate and accurate use of technical language. The presentation of your work will include a methodical value analysis, break even report for your manager, full consideration of the principles of standardisation and appropriate methods being used to select alternative materials and manufacturing processes for a product.
d) In this assignment you are required to take responsibility for managing the use of data and investigating the application of the principles of Design for Manufacture, including value analysis and break even analysis. Your work will provide evidence that you have taken responsibility for these tasks by providing appropriate information and by presenting your work in a professional way. This will include evidence of references to show the background reading you have done on these topics.
Entrepreneurship And Innovation Management – Entrepreneurial Venture – Presentation Assignment
TASK1
Consider an entrepreneurial venture known to you from either the course materials or your own experience.
a)Prepare a Word Document answering the following question:
Describe its entrepreneurial lifecycle and analyse its experience in terms of the concepts described in the EIM course. The analysis should be carried out in terms of the concepts described in the topics 1, 2, 3 and 6 of the programme. From topic 1, the concepts related to the stages of the entrepreneurial life cycle (i.e. business opportunities, ideation and testing, business model generation, resource acquisition, management and execution). From topic 2, the concepts of identification and assessment of business opportunities. From topic 3, the concepts, frameworks and tools for turning ideas into products or services, measuring the customer response, and learning from this loop. From topic 6, the concepts related to effectuation and stages for funding a start-up. It is important to mention that participants can use content from other sources related to the concepts studied in topics 1, 2, 3 and 6.
TASK2
b) Prepare a power point (PPT) presentation and a video addressing the following
Describe your chosen venture’s business model using the Business Model Canvas, identify its strengths and weaknesses. Identify a challenge or opportunity for improvement in the venture described. Develop a proposal for improvement in response to this, utilising formal concepts from the topics 4, 5, 7 and 8. From topic 4, the concepts and frameworks related to the business model innovation process. From topic 5, technological concepts and trends that enable new innovative and disruptive business models. From topics 7 and 8, the innovation theories, methods and tools supporting entrepreneurs during the different stages of the entrepreneurial journey. The video should be of duration no more than three minutes and power point (PPT) presentation no more than six slides.
TASK3
The Video Presentation:
c)The video’s aim is to develop the participant’s ability to give a brief presentation. In particular, some recommendations for the video presentation are as follows:
Control your nervousness.
Know your topic well.
Main ideas stated clearly and logically
Talk at natural rate of speech and speak clearly.
Organize your main points and rate of speech so that you speak for your three minutes.
Adhere strictly to your time limit.
Show some enthusiasm
Presentation and Video Format:
Recommendations for presentation format are as follows :
The best slides may have no text at all.
Use high-quality graphics including photographs.
Use a consistent visual theme throughout your presentation.
Colour evokes feelings. Colour is emotional. The right color can help persuade and motivate.
Fonts communicate subtle messages in and of themselves, which is why you should choose fonts deliberately. Use the same font set throughout your entire slide presentation, and use no more than two complementary fonts.
Recommendations for video format are as follows:
As good a resolution and quality as you can muster. If you are using your webcam then make sure it is set to the highest quality setting; likewise if you are using a camera/camcorder.