Instructions to Student
<General Instructions/information for the students for completing the assignment>
| |
Answer all questions. Deadline of submission: 08/06/2020 |
23:59 |
| | The marks received on the assignment will be scaled down to the actual weightage of the | |
| assignment which is <50> marks | ||
| | Formative feedback on the complete assignment draft will be provided if the draft is submitted at least 10 days before the final submission date. Feedback after final evaluation will be provided by 21/06/2020 |
|
| |
Module Learning Outcomes
The following LOs are achieved by the student by completing the assignment successfully
1) Explain the differing perspectives and theories that contribute to the processes of Strategic
Management.
2) Understand and integrate a range of contemporary issues within the strategic management field
and their influence on the strategic decision making process.
3) Apply critical analytical processes, both qualitative and quantitative, within complex business
environments to develop cogent perspectives/ arguments.
Assignment Tasks
Case Study – This question is compulsory and MUST be attempted
The following information should be used when answering the provided questions below:-
1 Introduction
Belaria Shoes was formed by two brothers who were passionate about diversity in cultures existing in Italy in
early 1970s. At this time, the country was undergoing a period of rapid industrial growth and many companies
were established that paid low wages and expected employees to work long hours in dangerous and dirty
conditions. Workers lived in poor housing, were largely illiterate and had a life expectancy of less
than forty years.
The Belaria brothers held a set of beliefs that stressed the social obligations of employers. Their beliefs guided
their employment principles – education and housing for employees, secure jobs and good working conditions.
Belaria Shoes expanded quickly, but it still retained its principles. Today, the company is a private limited
company whose shares are wholly owned by the Belaria family. Belaria Shoes still produce footwear in
Petatown, but they now also own almost one hundred retail shops throughout Italy selling their shoes and
| ` | |
| IN SEMESTER (INDIVIDUAL) ASSIGNMENT | |
| Module Code: BUSS 1009 | Module Name: Strategic Management |
| Level: 3 | Max. Marks: 100 Scaled down to 50 |
boots. The factory (and surrounding land) in Petatown is owned by the company and so are the shops, which
is unusual in a country where most commercial properties are leased. In many respects this policy reflects the
principles of the family. They are keen to promote ownership and are averse to risk and borrowing. They
believe that all stakeholders should be treated fairly. Reflecting this, the company aims to pay all suppliers
within 30 days of the invoice date. These are the standard terms of supply in Italy, although many companies
do, in reality, take much longer to pay their creditors.
The current Belaria family are still passionate about the beliefs and principles that inspired the founders of the
company.
Recent history
Although the Belaria family still own the company, it is now totally run by professional managers. The last
Belaria to have operational responsibility was Jock Belaria, who commissioned and implemented the last
upgrade of the production facilities in 1991. In the past five years the Belaria family has taken substantial
dividends from the company, whilst leaving the running of the company to the professional managers that
they had appointed. During this period the company has been under increased competitive pressure from
overseas suppliers who have much lower labour rates and more efficient production facilities. The financial
performance of the company has declined rapidly and as a result the Belaria family has recently commissioned
a firm of business analysts to undertake a SWOT analysis to help them understand the
strategic position of the company.
SWOT analysis: Here is the summary SWOT analysis from the business analysts’ report.
Strengths
Significant retail expertise: Belaria Shoes is recognized as a successful retailer with excellent supply systems,
bright and welcoming shops and shop employees who are regularly recognized, in independent surveys, for
their excellent customer care and extensive product knowledge.
Excellent computer systems/software expertise: Some of the success of Belaria Shoes as a retailer is due to its
innovative computer systems developed in-house by the company’s information systems department. These
systems not only concern the distribution of footwear, but also its design and development. Belaria is
acknowledged, by the rest of the industry, as a leader in computer-aided footwear design and distribution.
Significant property portfolio: The factory in Petatown is owned by the company and so is a significant amount
of the surrounding land. All the retail shops are owned by the company. The company also owns a disused
factory in the north of Italy. This was originally bought as a potential production site, but increasingly
competitive imports made its development unviable. The Petatown factory site incorporates a retail shop, but
none of the remaining retail shops are near to this factory, or indeed to the disused factory site in the
north of the country.
Weaknesses
High production costs: Italy is a high labor cost economy.
Out-dated production facilities: The actual production facilities were last updated in 1991. Current equipment
is not efficient in its use of either labor, materials or energy.
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 3 of 10
Restricted internet site: Software development has focused on internal systems, rather than internet
development. The current website only provides information about Belaria Shoes; it is not possible to
buy footwear from the company’s website.
Opportunities
Increased consumer spending and consumerism: Despite the decline of its manufacturing
industries, Italy remains a prosperous country with high consumer spending. Consumers
generally have a high disposable income and are fashion conscious. Parents spend a lot of money
on their children, with the aim of ‘making sure that they get a good start in life’.
Increased desire for safe family shopping environment: A recent trend is for consumers to prefer
shopping in safe, car-free environments where they can visit a variety of shops and restaurants.
These shopping villages are increasingly popular.
Growth of the green consumer: The numbers of ‘green consumers’ is increasing in Italy. They
are conscious of the energy used in the production and distribution of the products they buy.
These consumers also expect suppliers to be socially responsible. A recent television programme
on the use of cheap and exploited labor in Ethiopia was greeted with a call for a boycott of goods
from that country. One of the political parties in Italy has emphasized environmentally
responsible purchasing in its manifesto. It suggests that ‘shorter shipping distances reduce
energy use and pollution. Purchasing locally supports communities and local jobs’.
Threats
Cheap imports: The lower production costs of overseas countries provide a constant threat. It is
still much cheaper to make shoes in Ethiopia, 4000 kilometres away, and transport the shoes by
sea, road and train to shops in Italy, where they can be offered at prices that are still significantly
lower than the
footwear produced by Belaria Shoes.
Legislation within Italy: Italy has comprehensive legislation on health and safety as well as a
statutory minimum wage and generous redundancy rights and payments for employees. The
government is likely to extend its employment legislation programme.
Recent strategies
Senior management at Belaria Shoes have recently suggested that the company should
consider closing its Petatown production plant and move production overseas, perhaps
outsourcing to established suppliers in Ethiopia and elsewhere. This suggestion was immediately
rejected by the Belaria family, who questioned the values of the senior management. The family
issued a press release with the aim of re-affirming the core values which underpinned their
business. The press release stated that ‘in our view, the day that Belaria Shoes ceases to be a
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 4 of 10
Petatown company, is the day that it closes’. Consequently, the senior management team was
asked to propose an alternative strategic direction.
The senior management team’s alternative is for the company to upgrade its production
facilities to gain labor and energy efficiencies. The cost of this proposal is $37·5m. At a recent
scenario planning workshop the management team developed what they considered to be two
realistic scenarios. Both
scenarios predict that demand for Belaria Shoes’ footwear would be low for the next three years.
However, increased productivity and lower labor costs would bring net benefits of $5m in each
of these years. After three years the two scenarios differ. The first scenario predicts a continued
low demand for the next three years with net benefits still running at $5m per year. The team
felt that this option had a probability of 0·7. The alternative scenario (with a probability of 0·3)
predicts a higher demand for Belaria’s products due to changes in the external environment.
This would lead to net benefits of $10m per year in years four, five and six. All estimated net
benefits are based on the discounted future cash flows.
Required:
Question One
Using academic principles and examples from the above case, assess the following concepts:-
(a) Strategy (15 marks)
(b) Strategic planning (15 marks)
(c) Strategy development. (20 marks)
Question Two
Belaria shoes wishes to develop a strategy for guiding its operations in future.
(a) Classify and examine the main factors which are likely to shape and influence the values
and strategy of the above organization? (25 marks)
(b) Discuss the likely problems with mergers as a means of external growth. (25 marks)
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 5 of 10
Rules & Regulations:
<Below given are only suggestive. It may be edited as per the needs of the assignment/module>
| |
All resources should be cited using CU Harvard style. The final assignment must have a Title page, Table of Contents, References/ bibliography using CU Harvard Style and page numbers. Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of the faculty. Softcopy in word format is to be submitted through Turnitin link on Moodle. Viva will be conducted after the assignment submission as per the dates informed earlier. |
| | |
| |
Guidelines:
<Below given guidelines are only suggestive. It may be edited as per the needs of the assignment/module>
| | Assignment must be computer typed. |
| |
Font – Times New Roman Font – Style – Regular Font – Size – 12 Heading should be with Font Size 14, Bold, Capital and Underline. |
| | Explain with suitable diagrams wherever required. Diagrams must be drawn using suitable software or by pencil. Each student has to do the assignment individually / Students have to do the assignment collaboratively and each student should write a brief reflection on their contribution and learnings from group work. You can refer books in eLibrary or use internet resource. But you should not cut and paste material |
| | |
| |
from internet nor provide photocopied material from books. The assignment answers should be
in your own words after understanding the matter from the above resources.
Important Policies to be followed
1. Student Academic Integrity Policy*:
MEC upholds the spirit of academic integrity in all forms of academic work and any form of violation
of academic integrity shall invite severe penalty. Any benefit obtained by indulging in the act of
violation of academic integrity shall be cancelled.
All cases of violation of academic integrity on the part of the student shall fall under any of the below
mentioned categories:
1. Plagiarism
2. Malpractice
3. Ghost Writing
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 6 of 10
4. Collusion
5. Other cases
If the student fails a module and has a proven case of academic integrity violation in this module, the
student is required to re-register the module. This is applicable to first and second offenders of
plagiarism.
1. Plagiarism
A. First offence of plagiarism
I. If a student is caught first time in an act of plagiarism during his/her course of study in
any assignment other than project work, the student will be allowed to re-submit the
assignment once, within a maximum period of one week. However, a penalty of
deduction of 25% of the marks obtained for the resubmitted work will be imposed.
| II. | Period of re-submission: The student will have to re-submit the work one week from the date he or she is advised to re-submit. If the re-submitted work is also found to be plagiarized, then that assessment will be |
| III. |
awarded a zero mark. Re-submission of the work beyond the maximum period of one
week will not be accepted and the assessment will be awarded a zero mark.
B. Second offence of plagiarism
If any student is caught second time in an act of plagiarism during his/her course of study (in a
subsequent semester), the student will directly be awarded zero for the work in which plagiarism
is detected. In such cases, the student will not be allowed to resubmit the work. A warning of
suspension shall be issued, and student has to sign an undertaking and undergo counselling
session in such cases.
2. Malpractice/Ghostwriting/Collusion
A. First offence of Malpractice/Ghostwriting/Collusion
If a student is caught in an act of Malpractice/Ghostwriting/Collusion for an assessment
component irrespective of coursework or end semester, the student shall fail the module
and shall be required to re-register the module
B. Second Offence of Malpractice/Ghostwriting/Collusion
If a student is caught a second time in an act of Malpractice/Ghostwriting/Collusion for
an assessment component irrespective of coursework or end semester, the student
shall fail the module. A warning of suspension shall be issued, and student has to sign
an undertaking and undergo counselling session in such cases.
3. Third Offence of Academic Integrity Violation
If a student is caught a third time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student
shall fail the module and also shall be suspended for one semester from the College, as
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 7 of 10
recommended by institutional level academic committee, Chaired by the Associate Dean, Academic
Affairs.
4. Fourth Offence of Academic Integrity Violation:
If a student is caught a fourth time in an act of Academic Integrity Violation for an assessment
component irrespective of coursework or end semester (in a subsequent semester), the student shall
fail the module and also shall be expelled from the College, as recommended by institutional level
academic committee, Chaired by the Associate Dean, Academic Affairs.
5. Other cases
If a student commits an act of academic integrity violation as per the definition of “other cases”
mentioned in the previous section or of a different nature, student’s case shall be forwarded to an
institutional level academic committee, Chaired by the Associate Dean, Academic Affairs. The
committee shall investigate the case by means of a viva and/or a disciplinary hearing and shall take
appropriate decision. The penalty that can be granted to a proven case of academic integrity violation
which falls in this category of “other cases” can be a warning/component zero/ module
fail/suspension/expulsion depending on the nature and gravity of the offence.
6. Types/Variations of Cases:
| I. | If plagiarism is detected in any component of one assessment, the deduction in marks will be applicable for the whole assessment, even if only the component or part submission alone needs to be resubmitted. If plagiarism is detected in a group assessment, all students of the group will be considered as having committed an act of plagiarism and the policy will then be applied to all students If plagiarism is detected in any component of a group assessment, the deduction in marks will be |
| II. | |
| III. |
applicable for the whole assessment even if only the component or part submission alone needs
to be resubmitted.
All students of the group would be considered as having committed an act of plagiarism and the
policy will then be applied to all the students of the group.
| IV. | If the assessment consists of components or part submissions that could be a group assessment component (e.g. group assignment) and an individual assessment component (e.g. individual reflection), the following will be applicable: |
| a. | If plagiarism is detected in the group assessment component, all students of the group |
will be considered as having committed an act of plagiarism, The policy will then be
applied to all students of the group. Group assessment component will be resubmitted
as per the policy.
b. If plagiarism is detected in the individual assessment component, the individual
assessment component will be resubmitted and the policy will then be applied to that
student alone.
c. For both (a) and/or (b), the deduction in marks will be applicable for the whole
assessment.
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 8 of 10
* for further details Refer to MEC Student Academic Integrity Policy in Student Handbook.
2. Late Submission Regulations:
<Following content to be added for UG>
It is the students’ responsibility to check all relevant timelines related to assessments.
As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days)
for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the
submitted work shall be imposed for each working day following the last date of submission
till the date of actual submission. Assessment documents submitted beyond a period of one
week (5 working days) after the last date of submission will not be accepted and will be awarded
a zero for that assessment. In cases where the submission has been delayed due to extenuating
circumstances, the student may be permitted to submit the work without imposing the late
submission policy stated above. The extended period of submission will be one week from the
original last date of submission. In such cases, the student is expected to submit the supporting
certificates on or before the original last date of submission of the assessment and the decision
of extension rests with faculty responsible for the assessment .The late submission policy shall be
applied if the student fails to submit the work within one week of the original last date of
submission.
Students may contact their teachers for clarification on specific details of the submission time if
required.
<Following content to be added for PG>
It is the students’ responsibility to check all relevant timelines related to assessments.
Late submission penalty for PG modules shall be imposed 10% deduction of the marks obtained
for work submitted up to 1 week (5 working days) after the due date for submission and for work
submitted after this, but up to 2 weeks (10 working days) late, student will lose a further 10% of
the obtained mark (i.e. 20% overall). Work tendered for submission more than 2 weeks (10
working days) after the due date will not be accepted and an absence will be recorded for the
assessment concerned. This will count as a failed attempt and may result in failing the module
overall.
Students may contact their teachers for clarification on specific details of the submission time if
required.
3. Research Ethics and Biosafety Policy
To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved
including the welfare of animals and the integrity of environment, all student projects are
expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the
following shall apply.
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 9 of 10
| | Research and other enterprise activities shall be conducted by maintaining the high ethical standards consistent with national and international standards and conventions. |
| | Any research at MEC that is categorized as high-risk research shall be subject to review and approval by the Research Ethics and Biosafety Committee. |
Research activities involving collection of human or animal tissues and manipulation of microbial,
animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety
Committee.
Participants involved in research must be informed about the purpose of research and intended
uses of research findings. Written consent must be obtained from people involved prior to the
commencement of research.
| | Data obtained from participants must be treated with high confidence and should be used only for the intended purpose of research. |
Assessment Evaluation Criteria
<The evaluation grid given below can be tweaked as per the assignment and module needs>
| Classification And % Range <to be given as per requirement> |
Reflection and critical analysis. |
Knowledge and Understanding/ Application of Theory |
Evidence of Reading | Referencing and Bibliography |
Presentation, Grammar and Spelling |
| Outstanding | Highly competent analytical skills and reflective practice, demonstrating personal learning and growth, insight into required professional values and principles and professional development planning. |
Extensive knowledge and depth of understanding of principles and concepts and /or outstanding application of theory in practice. |
Evidence of reading an extensive range of educational literature/research and where applicable workplace strategies, policies and procedures. |
Accurate referencing and bibliography correctly using appropriate referencing style |
Excellent presentation, logically structured, using correct grammar and spelling, excellent cross referencing and links to supporting evidence |
| Excellent | Strong analytical skills and reflective practice used, demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. |
Excellent knowledge and understanding of principles and concepts and /or excellent knowledge and understanding of the application of theory in practice |
Evidence of reading a wide range of educational literature/research and where applicable, workplace strategies, policies and procedures. |
Appropriate referencing and bibliography correctly using appropriate referencing style |
Good presentation, competently structured, using correct grammar and spelling, clear and easy to use links to supporting evidence |
| Very Good Quality | Good use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. |
Good knowledge or key principles and concepts and/or good knowledge of the application of theory in practice |
Evidence of reading a good range of educational literature/research and where applicable workplace strategies, policies and procedures. |
Generally well referenced with correct use of the appropriate referencing style |
Reasonable presentation, completely structured, acceptable grammar and spelling, acceptable links to supporting evidence |
| Good (Acceptable) | Acceptable use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required professional values, principles and competencies and professional development planning. |
Acceptable knowledge of key principles and concepts and/or knowledge of the application of theory in practice |
Evidence of reading an appropriate range of educational literature/research and where applicable, relevant workplace policies and procedures |
Adequate referencing. Generally accurate use of appropriate referencing style |
Adequate presentation and structure, acceptable grammar and spelling, adequate links to supporting evidence |
| Adequate/ Satisfactory | Adequate use of analytical skills and reflective practice demonstrating personal learning and growth, |
Adequate knowledge of key principles and concepts and/or satisfactory |
Evidence of minimal reading of educational literature/research and where applicable relevant |
Adequate referencing. Appropriate referencing style used but may contain some inaccuracies. |
Weak presentation , satisfactory structure, grammar and spelling, links to supporting evidence |
Module Name Strategic Management (BUSS1009) – Semester – Spring 20 – CW 1 (Assignment) –
Session D – QP
MEC_AMO_TEM_034_01 Page 10 of 10
| insight into required professional values, principles and competencies and professional development planning. |
evidence of the application of theory in practice. |
workplace policies and procedures |
|||
| Weak /Poor (all learning outcomes not adequately met) |
Little use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and/or professional development planning. Professional values and principles not reflected in the submission. and/or Insufficient/no use of analytical skills and reflective practice demonstrating personal learning and growth, insight into required competencies and professional development planning |
Little evidence of knowledge of key principles or concepts and/or little evidence of the application of theory in practice and/or No evidence of knowledge of key principles or concepts and/or no evidence of application of theory in practice |
Little or no evidence of reading outside of the course textbook and/or reference to relevant work place policies and procedures and/or No evidence of reading outside of the course textbook and/or reference to relevant workplace policies and procedures |
Little or no referencing, incorrect style, or very inaccurate use of appropriate referencing style |
Poor presentation, grammar and spelling, links to supporting evidence and/or Unacceptable presentation, grammar and spelling, structure is very poor, links to supporting evidence |
The post processes of Strategic Management appeared first on My Assignment Online.