Q1 (Total 3 marks)Below, you are given the packet dump of an Ethernet packet (not including preamble/Start of FrameDelimiter). The dump is in hexadecimal format with bytes ordered across the page. The numbers 1-20above the line are there to assist in counting bytes.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 201F 6D 36 F4 85 33 78 C7 5F 15 24 A8 15 EF 34 AB 03 12 44 00i. Is the format of this frame Version 2.0 frame or IEEE 802.3?ii. Determine the values of the destination address and source address.iii. Write out the first 4 bits of the destination address to be transmitted, indicating the order oftransmission.Q2. (2 mark)Why do collisions occur in CSMA, if all nodes perform carrier sensing before transmission?Q3. (4 marks)The current MAC address table of a bridge is given as follows.0/1 98-5D-67-09-D6-94 4B-CD-96-10-35-760/2 AD-CD-67-EE-FF-22 87-DE-04-05-06-D80/3 56-98-98-00-22-44i. Suppose the bridge receives a packet on port 0/3 with the following source and destinationaddresses:Dest=4B-CD-96-10-35-76 Source=88-77-33-EF-11-A4Describe what actions the bridge does in its role as a bridge?ii. Suppose a second packet is received shortly after the first packet on port 0/3 (with no otherpackets received in the meantime on port 0/3 or any other ports) with the following source anddestination addresses:Dest= 4B-44-67-78-0D-EB Source=88-77-33-EF-11-A4Describe what actions the bridge does in its role as a bridge?
The post What actions the bridge does in its role as a bridge? appeared first on My Assignment Online.